In your example above you have no working loop, that's why you get no sound when you activate it.
Try instead: Kemper Send into Eleven Input. Then Eleven Output into Kemper Return.
In your example above you have no working loop, that's why you get no sound when you activate it.
Try instead: Kemper Send into Eleven Input. Then Eleven Output into Kemper Return.
Like Ingolf said^
No, you have it into the 11R return, you need to put it into the 11R input where you would plug your guitar into. Then the normal ouput of the 11R back to the KPA Return. You are putting the KPA into the 11R efx loop but you need to use the 11R like it's an efx pedal in the KPA loop. If that makes sense ( 
)
Ok i've figured out how to get sound. The "mix" in the loop is set to 100% by default. I turned it down and I could hear sound again.
However I still can't hear any of the effects from the 11R
http://i193.photobucket.com/albums/z240/gigfizz/P1010787.jpg
Here is a pic of how it's set up.
http://s193.photobucket.com/us…z/media/P1010787.jpg.html[/img]
Ok, just looked at how I have my Stereo Jamman Looper set in a effects Slot. 1st, which Loop do you have in the Slot? (Stereo or Mono). Try Stereo and set mix to 100%. My loop is set in Slot X also. Not sure why but I just tried a mono loop with it and it didn't produce any sound either. I'm not an expert by any means just trying to help with what I have that works.
Never had an 11R but you might also try using the front input and output to see if that makes a difference also. Ok, a little more info.. The mono loop gets sound out, from KPA, like yours if I turn the mix all the way down, so this is pointing to your cables TS or TRS. Stereo or mono. Your photo show your line in on a Left channel and Output on Right Channel.
