Well.....
I have an issue with my kemper head.
I use stereo configuration in every show.
Yesterday every thing was ok.
But tonight i had a problem:
On of the xlr outputs (left side) is lower in volume by 5db exactly.
Panorama is set to <0> .
And "space" mode is off.
Could it be a software issue
I assume that if one of the XLR "legs" was broken, then no sound would come out of this jack at all.....
(I use the 3.3.0 after down grading
From 4.0.3....)
Please help!
Left and right are not balanced!
- noamb2604
- Thread is marked as Resolved.
-
-
How are you testing the volume of the two outputs?
Are you using a profile with all stereo FX bypassed to test this?
Is it possible something is turned down 5db in one of the channels of your mixer/interface/DAW? The quickest way to determine this is to switch the two XLRs attached to the KPA - if the issue does not change to the other side, it is not in the KPA.
-
XLR plugs have two hots. With 180 degree phase between them. So if one of the hots is dead it will still sound, but less louder. But actually this should be -3dB, if I remember correctly.