As the title really. Anyone else experience this. The pedal works, then it doesn't, then it does again! Its as if the pedal 'freezes'!
Any help suggestions greatfully received
As the title really. Anyone else experience this. The pedal works, then it doesn't, then it does again! Its as if the pedal 'freezes'!
Any help suggestions greatfully received
First time I hear this.
I own this pedal too. Without this problems.
For me it sounds like a broken wire... did you check it out?
Thanks Kulle. Not tried new leads, due to expense really (2x 5metre MIDI cables)... though I'm thinking it may be the cheapest option to replace!
Perhaps you have the possibly to borrow the 2 cable for a day. Or you buy 2 X 1.5m cable. They are always needed.
The second problem could be the chip...
I have had problems with the midi out from the Kemper into the pedal, this was due to faulty cables. Have you got the Uno4Kemper firmware?
Its Eurekaprom! I do use 2 cables, its looking like a cable swap may be the way to go! Just seems odd, as it stops working, then starts, with no real cable movement! Might try swapping the cables across. A good cable from pedal to Kemper is probably better than Kemper to pedal!
I just bought a pair of dual midi leads from Amazon. One midi lead failed on a gig and it was strange trying to remember which patch was on with nothing coming back from the kemper.
Have you checked the bars on page Pedal Links in the Profiler's System Settings? These do reflect, what the Profiler receives.
Are you using any Pedal Links? Perhaps you are wondering why your pedal doesn't control volume while "WahPedal to Volume" is activated and a Wah effect is active.