Shi.... Something must be terribly wrong...contact Support for it.
Profiling problem, need help!
- Painfulpenetration
- Closed
- Thread is marked as Resolved.
-
-
Shi.... Something must be terribly wrong...contact Support for it.
after a lot attempts to boot from the usb stick it somehow work, but dont ask me what i did. happy again!
-
but profiling still does not work. it seems like the kemper gets no input from the mic. i tried several mics an cables, just a simple setup, everthing setup up corretly. volume maxed and even the amp is brutally loud...
-
Which firmware are you running now?
-
1.0.3.7059
-
Really stupid question: have you tried with another mic? Or just jumping send and return with a patch cable to check if the signal comes through?
-
I got a lot of noise on my mic input on previous versions but haven't yet tried it on 1.03. I use the TRS input with a preamp and that's fine.
-
1.0.3.7059
With this version i've problem with the kemper mic preamp! when i crank the preamp input to +32db i still eard nothing!
but with the 1.0.2 version, it's working like a charm! try it! -
With this version i've problem with the kemper mic preamp! when i crank the preamp input to +32db i still eard nothing!
but with the 1.0.2 version, it's working like a charm! try it!Is only the XLR, the TRS works
-
Is only the XLR, the TRS works
But the TRS is for a line lvl only or you can put a mic through this input?
-
TRS is just for line level. I tried the xlr mic input in 1.03. Still a bit noisy, but less so than before and definitely getting signal.
