Steep volume pedal curve

Hi,

I just got my Profiler a few days ago. Bought it with the Mission EP1-KP.

I noticed a rather steep curve in the lower end of the pedal.

When using it as volume pedal on "input", the gain seems to explode in the lowest 10% of the pedal while the upper 50% seem to do nothing.

When having an eye on the "calibration" meter, it confirms my perception.

It's almost as if the poti has an inverse logaritmic curve like the green one:

Is there a way to adjust the behavior of the pedal?

Thanks and best regards!

Froeschlein

Hi Hoki Toki,

as I tried this, I had to make some other setting changes, because input 2 was set to "dual switch".

There I noticed, that there are 2 types of expression pedals types in the settings ("Pedal type 1" and "Pedal type 2").

For some reason, I had set my input 1 to "Pedal type 2" which - according to the manual - is only for pedals with an "reversed polarity" and could lead not to a reversed, but to a "a suboptimal response curve".

After setting the input 1 (where my EP1-KP was connected) to "Pedal type 1", the curve seemed to be linear.

That was it, thank you very much!

I appreciate your help!

Cheers,

Froeschlein