SPDIF SOUND FUZZY

simul_sven · Sep 4th 2012

Hi there,

I´m using the KPA with a Saffire Pro 40. All analog outputs sounds great and "warm". But when I use the SPDIF OUT to PRO 40 IN it sounds a little bit flat and fuzzy. Levels seemed to be OK. Can anyone help me to get a nice tone/sound by using the SPDIF? Thanks!

djazz · Sep 4th 2012

Make sure you have the sample rate set to 44.1 not 48 khtz. When I use Logic Studio and have it set to 48, it sounds that way. This might be your issue.

almogaver · Sep 4th 2012

And make sure to have the sync source set to "SPDIF" (not "internal" or other) as well.

PS: I use a Saffire too.

simul_sven · Sep 5th 2012

yeah! the sync was not correct. Thank´s a lot for this little but important hint!!! Sound is perfect....

drumdrum · Sep 6th 2012

Are you referring to the internal clock source of your soundcard, or is it a separate setting in Logic you are referring to?

thanks

almogaver · Sep 7th 2012

Quote from drumdrum

Are you referring to the internal clock source of your soundcard, or is it a separate setting in Logic you are referring to?

thanks

The internal clock source of the soundcard.

You're welcome!

Share