How reamp with kemper step by step
- manegarm
- Closed
-
-
men not work, not signal from kemper
i need one spdif cable or 2?
see the photos:
[Blocked Image: http://fotos.subefotos.com/3345af4534754f41f7383bfd2f307258o.jpg][Blocked Image: http://fotos.subefotos.com/1a8eda3090d98407e6dfc07808f66ba2o.jpg]
[Blocked Image: http://fotos.subefotos.com/ba4865b5b4845fcb3dbbd77c875e8bdbo.jpg]
[Blocked Image: http://fotos.subefotos.com/c186a7cf3e55e039546c4a6347e7c26ao.jpg]
Does it help if you change sync to SPDIF in DAW ?
I see you have Internal in last Picture.
// Björn -
that can´t change it. but are in spdif. i see in the interface the light on
see the video i dont know how setuo the wet track
-
OK.
Light on on KPA when playing dry track ?
If so that is god.
Wet track input = SPDIF
If you recording stereo dont set output to SPDIF on wet track ,(I Think you get feedback in that case). -
yes but see that in the video i cant select spdif in the wet track. only dry or wet signal
the spdif in and spdif r are mono tracks ( dry signal- wet signal)
-
Sorry I couldn´t help you.
// Björn -
ok we tried with another kemper unit, same!!!! not work. this its very strange. spidif in its on, output too.
i will record a video with my camera to show you the connections
-
ok i can listen kemper reamp with phones and with other interface of a friend. the problem its not cubase or my kemper!!! was my focusrite liquid preamp 56. i don´t know how config for send the spidif signal to kemper.
i will put photos of the focusrite main windows
[Blocked Image: http://c390.r90.cf3.rackcdn.com/liquid_saffire_56228.jpg]
[Blocked Image: http://www.focusrite.com/answe…/SMCTutorial/Picture5.png]
http://www.focusrite.com/answerbase/en/article.php?id=1062
that its the helpcenter.maybe now you can just give me the answer for go on with the focusrite liquid 56 with kemper
-
If you look at the bottom of the pic you posted you'll see two buttons labeled 'spdif out 1' and 'spdif out 2'.
Make sure 'Mix 1' is selected in both.
-
what of all mix 1
spif out are on
-
what of all mix 1
spif out are on
I'm sorry, i don't understand.Spdif out 1 and 2 are set to "off" in your pics.
Set them to mix 1. -
are setup ok, the photo its from focusrite website. not of my pc
do that not work.
im now in a focusrite sclarlet from a friend. same problem
-
Originally Posted by TheIllusionist [Blocked Image: http://www.ultimatemetal.com/forum/images/buttons/viewpost.gif]Okay,
I use a Focusrite Saffire Pro 40, very similar:
In your Focusrite mixer window you need to do the following...
Where is says "SPDIF OUTPUT 1" You need so select a DAW output such as "DAW 7", then in Cubase, you need to set the output of your DI track to that same DAW output
MEN THANKSSSSSSS YOU GIVE ME THE SOLUTION. THAT WAS THE PROBLEM. THANKS YOU VERY MUCH.
SO PEOPLE WITH FOCUSRITE INTERFACES THIS ITS THE SOLUTION.
-
Nice to hear
-
-
one quick question regarding reamping.
is it possible to reamp a bus track, let's say I have two guitar tracks that are dry i set the output of both of them to the same stereo-bus and I want to reamp that stereo bus. Is that possible? Or can I just reamp single tracks?
-
a big thanks to nakedzen!
- what is the "best" spdif able soundcard (in your humble opinion, ofcourse)
- which one the most affordable?
thanx
-
If you only want to record guitars via spdif then just buy a cheap one that has a spdif input. I highly doubt that there are any differences as there is no A/D conversion going on.
-
sorry, both signals (wet and dry) go to my DAW via the soundcard?!
so that IS analog to digital? or not?am i right or am i right or am i right? {groundhog day}
-
You're wrong because the A/D conversion has been done by the KPA.
Dry and wet over SPDIF are already digitalized.