Hi! I´m going to control my monitor out with a foot control pedal via Midi. Is this possible? If yes, there must be a #CC number, isn´t it? Thanks for your help - Michi
Monitor Out with a CC Number?
- blitzkidz
- Closed
- Thread is marked as Resolved.
-
-
Hey and welcome to the forum.
No, what you ask is not possible.
You can store different output volumes for main and monitor out, but controlling monitor volume by midi is not possible.
You can of course have a volume pedal connected between monitor out and amp/monitor. -
Hi! I´m going to control my monitor out with a foot control pedal via Midi. Is this possible? If yes, there must be a #CC number, isn´t it? Thanks for your help - Michi
Read the MIDI Parameter Documentation Page 7 (rev58).B0 63 7F
B0 62 00
B0 77 (volume)Timo
-
Read the MIDI Parameter Documentation Page 7 (rev58).B0 63 7F
B0 62 00
B0 77 (volume)Timo
Thank you Timo!!! I´´ll try later and hope my poor midi knowledge is effectual!
-
Hi!!! Thank you very much for your welcome! Very kind!!! Later I´´m going to try Timo´s tip.
-
Hey and welcome to the forum.
No, what you ask is not possible.
You can store different output volumes for main and monitor out, but controlling monitor volume by midi is not possible.
You can of course have a volume pedal connected between monitor out and amp/monitor.Thank you for welcome me! Very kind!!! well, I guess my midi-knwoledge is not good enough to follow Timos tip. It would be a little more elegant and dressy to control everything with only one midi foot controller, but your idea is foolproof and maybe my best way.
I got another way - I´´m not sure if it works, but I could connet my KPA Monitor Out with my Digitech 2101 Input, wich I can use only for a midi volume control. I always got a second preamp (mostly my Digitech 2101 or Digitech valve FX) with me, as a spare preamp for my KPA.
Best regards
-
Hehe, you know, when Timo talks about NRPN it's like a foreign language for me.
-
... He's an Intermediate now
-
NRPN is just a convention using a sequence of normal controllers. Selecting the parameter, then transmitting the value.
Timo