If you DIY it yes and then you have 4 inputs on one side going all in parallel to one output. Or you buy 3 of their cables (my current setup, going to replace them with a custom one in the next few days though)
Amazing, thanks once again!
Posts by luizfrma
-
-
What are the specifications for the current doubler cables? Should be male-to-male I guess?
Display MoreSure
currently running that setup (Dingbat Tiny, Shure GLXDR16+, Dunlop DVP4 Mini)
I will most likely take off the DVP (and have it extra) when the Luminite Graviton M1 I ordered arrivies.
I might swap the SOL out with the DC7 then, depending how powering everything works.
This is my "vacation rig" and took it to Sweden over new year's (without the Dingbat at that time) and its very nice for that purpose.
-
On the player?
You can do that in Performance mode
-
I would be really cool if we good name every Bank on the rig manager application. I would like to categorize it by amp brands, or even instruments. For example, I'm using my Player for both bass and guitar jams, and sometimes I wish the app could tell me quickly the custom name of the bank I'm at, instead of having to read the profile name and realize what is it. Ty!
-
Currently doing that (4. outputs into one) works fine
finally got the board, so this is my current setup. Hoping I'll be able to get away with the Cioks SOL.
-
Sure. Here it is with the dunlop dvp4 instead of the “big” kh-95 wah.
thank you very much! Damn, it looks good. Actually it seem to have a better clearance considering the player's dimensions.
-
Tadaaaaa! The KH-95 will be replaced with a Dunlop mini dvp4 as the KH is a bit too big for the Metro16.
The vent at the bottom of the player is pretty much obstructed by the metro16’s middle beam.
Hope that won’t cause issues.
Hey! could you add a couple more pictures of your board by any chance? I thought the metro 16 was bigger..but it looks good. Initally I was planning on getting the voodoo labs dingbat tiny.
-
Depending on your needs a Cioks Sol (5 outputs, 4 needed for player) or Cioks DC7 (7 outputs, optional add on, Crux, that can power the player on its own, or 4 for the player again)
Not the cheapest options but rock solid and buy once and stop thinking about it territory
Do you know if this one would work? The Fender Engine Room LVL8 power supply.
-
so 4 outputs 9v 500ma each? which means this pedal powers up with 9V 2000ma?
-
Thanks!
Np! Now I'm struggling to find a power supply for the board.
-
you need to add the Crux module from Cioks to the DC-7 to provide sufficient power for the Player.
alternatively you can use the extension port of the Palmer PWT 06 IEC.
Is the Palmer PWT 06 IEC by itself capable of powering up the player?
-
What pedalboard is that? Size looks great
Its the Voodoo Labs Dingbat Tiny!
-
This is gonna be my new setup!
Just wondering how am I going to power the player up.
