Posts by greglecompte

i have one i guess ill make a profile through a power amp of it and upload it it may take a few days though

the same way axe fx does. You find a part with just the guitar playing and use the eq analyzer to match. Then apply that eq to the track you are micing

you can then use the output of the daw to profile the tone matched signal.

type in ozone tone matching on youtube and check it out

interesting i could not get the beat scanner to work with my fcb with eureka prom tap works great though

personally

I have no lag switching. only the first time after reset do I have lag and I have made it a habit to switch before I start a set.

2 the boot time for me is a non issue if you are really worried abut it you could have a upc with battery so you retain power

3 do you really need 2 amps at the same time and if you do why not profile the 2 at the same time

4 if you really like the axe its download them and use carmaker to turn them into cabs for the kemper

5 you can use ozone 5 to tone mach an album and profile through that If you really want to tone match, but I have never seen the merit in copying someone, most of the tone is in your hands anyways.

my personal opinion of why i don't have an axe is that there is a weird sons in the upper midrange that bothers the hell out of me it makes everything sound so artificial.

i would boost the di send in your daw infill it sounds as desired

im in saint pete near tyrone mall pm me we can set something up

i just tried with another fcb that has the chip and it works maybe something is wrong with the fcb

i was wondering if some setting needed to be reset or something like that it worked great in 2.3.3

i was playing the other day and noticed that the fx slots no longer light up as they should with the eureka prom.

is this just a problem on my end or was something changed?

i found that turning on the fcb after the kemper helps

interesting i just downgraded and then went back to 2.3.2 and now its working with my fob with eureka prom in performance mode

the eureka prom is good as well. it will give you the half and half profile/stomps option

Quote from rm12

If you are using an fcb1010 with eureka prom you will get an error screen if you are in perform mode.

i have this as well

the eureka prom works with the beat scanner u just hold the tap tempo button down

yes I'm on 2.3.2

performance mode won't work here and beat skinner works but dose not turn off infill i hit the tap button again and if i just hold if for a couple seconds it shuts off immediately upon releasing

thinking i had the mic in a different channel but was actually looping the mic to the amp instead of the kemper to it like i said stupidity

ill upload the profiles in a min both of a splawn nitro one clean one distorted more of a dent style sound

never mind my stupidity

thats why I take a power amp di with a load box and profile my amps without the cab so that I can keep the sound I want when amplifying it through my cab or other guitar cabs