thanx!
Posts by seNums
-
-
Hi,
I just listened to a clip of the Salvation "Chupacabra" mts module:
https://soundcloud.com/salvation-mods/salvationmods-36
It sounds ridiculously heavy!
I think this module is a blend between Bogner, Splawn, Groove Tubes, Mesa Boogie and his own design!!
And so I wondered if anyone of you has ever profiled a salvation mods (pre)amp?Regards,
Patrick -
same here!
-
Hey Andy,
I don't know how you made the Bogner Überschall metal profile,
but it's the best profile for modern high gain stuff, I played so far!!
It sounds so 3 dimentional, just awesome!
Thanks for the great work!cheers!
Patrick -
-
Should I use the analog delay or the free delay effect for this? Or does it not matter?
-
+1 but we're asking a lot, don't you think ?.
+1 that would be awesome for people like me, who want to combine downloaded amps because they don't own a collection of great amps they could combine to their taste and than profile it in a studio.
-
-
-
No, but I had tweaked an existing Rivera profile for a jazzy tone quite a while ago - http://dl.dropbox.com/u/690187…012-05-19%2009-32-41.kiprHey, thanks for the profile, it sounds sweet!
-
Has anyone of you profiled a RIVERA JAZZ SUPREMA?
I would love to check this out!cheers!
-
??? not sure I understand you.... If you want to overdub with another Rig you need to reamp the dry track, if you want to change the cab just press and hold Cab and browse through the Rigs using the Browse knob
Sorry, if I've expressed myself too unclearly! Basically I meant I want to do blend two cabs as tylerhb mentioned in his post. My problem is that I downloaded the cabs I want to combine and I don't own any mics to profile the usual way. I thought maybe I could do this like profiling a "computer-based guitar amp simulation" (manual page 47) and use the kemper itself as reference amp. but this probably wouldn't work...
-
Ah, ok!
Just one more question (sorry if this is a stupid one):
So I want to combine two rigs I have on my KPA. How do I connect the KPA to make this work? Do I just need to connect: KPA-Send>>DAW>>KPA-Return for that? -
Hi!
Thanks for sharing your knowledge with us!I've only got some questions: Isn't the KPA also storing the power amp characteristics in the Cabinet-section?
And doesn't that mean, that you combine not only cabinet profiles but also the poweramps of different profiles? -
Thanks! But I tried that and nothing changed!
I made some tests and I found out that I just can't use 2 outputs at the same time:
if it is headphone and monitor, or main and headphone, or monitor and main....
anytime I try to use more than 1 output one of them lacks lacks or sometimes I can't get any sound!I've already done a reset by starting the KPA and holding the "System"-button, but this didn't help too.
Has anybody made the same experience?
-
Hi!
I’ve got a problem: I usually play through an active atomic FR speaker using
the monitor-output on the KPA. That worked perfectly fine until I added two XLR
cables to the master-outputs and connected them to the PA in our rehearsal
room. While the master-outs worked fine, suddenly the sound of my monitor-out
was lowered to a minimum level.I checked the output-section on the KPA and raised the monitor level to max while lowering
the master-out level and raised the main volume, but this made almost no hearable
difference to the monitor-out signal!So the two XLR-master-outs seem to eat the signal of the monitor-out, because when I unplug
them, suddenly the sound of my atomic monitor is there again.Any ideas why this happens? Thanks for your help!
Regards,
Patrick -
-
Hi,
I'm trying to build my live-setup. So I want to connect my KPA to a Macbook and use it as a midi device for automatic switching between rigs and pedals via Logic. We also want to play samples with Logic and send a click track to our drummer...What kind of interface do I need for that?
Can anybody tell me, how to do this?regards,
Patrick