Hi guys, sadly if i put any number in the VAT line it still says
ID is not valid.
Thing is my country is Australia so it should not be asking for a VAT number
any number does not work, can you suggest any thing else to put in the VAT field ?
Ash
Apologies, should be working now, it is a cart loom (the transaction system) bug as they are switching to a new version soon....... If not drop me a line (PM). Cheers!
hi ampsound!
I was checking your site...
I found that it is quite hard for me, to guess which amp was ment by your short description / name...
Could you be a bit more concrete?
All the best!
I am afraid this is because of paypal's very stringent "rules" as they won't allow brand names (even for those who don't exist any more) in the same page as "add to cart" buttons. I guess they haven't reached out to all profilers yet.... as they also state similar name won't be allowed. We may look into a different payment provider in the future. Again a profile is a purchased fully paid amp plus engineers plus our mics, pres, converters, monitoring chain, studio and experience but here I digress..... not just a brand name amp.....
Anyway here we go as of today:
Vintage Amps
BMSFender Bandmaster
CStop Carlsbro Top Head
LanLaney Lead & Bass
OROrange OR120
Smsg Simms Watts AP100 MKI
Svg100 Selmer Treble&Bass SV (MKIV)
Svg50 Selmer Treble&Bass SV (MKIV)
VL125 Vox V125 Lead
Wecg Wem ER 15 Head
Modern Amps
CaliMesa Boogie Caliber Plus
HG100 Roccaforte High Gain 100
Recto Mesa Boogie Dual Rectifier
Mbmk4 Mesa Boogie Mark IV
Mhg9 Marshall JCM900 4100
Mtsl6 Marshall TSL60
Ptb50 VHT Pittbull
PwbENGL Powerball
ShrSoldano HR50 Plus
Bass Amps
Av4B Ampeg V4B
Lba 60 Laney Bass 60
McbMark Bass 210 Combo
OrbOrange OR Bass Head
OtbOrange Terror Bass 500
Smsb Simms Watts AP100 MKI Bass Channell
Svb100 Selmer Treble&Bass SV (MKIV) Bass Channell
Svb50 Selmer Treble&Bass SV (MKIV) Bass Channell
T&B MKIII Selmer Treble&Bass MKIII
TVLR Eden Traveler Head
VB125 Vox V125 Bass Head
VAC50 Vox AC50 Bass Channell
Wecb Wem ER15 Bass Channell
WkmSWR Workingman Combo
Free Profiles
Doz28 DrZ 28
Mesblu Mesa Boogie Subway Blues
VxntVox Nightrain
Apg 115 Ampeg B115 Combo
Display MoreHi guys, I Tried to get both packs but get this
Please Complete Following Field(s)
Codice Fiscale o Partita .I.V.A. (V.A.T. I.D. Number)
I am in Australia, is there any way around this?
sorry it wont let me check out
Ash
Hi Ash, if you are not vat registered you can just fill the box with any number and it will let you check out. The box is there as it is mandatory for some of the EU member states in order to comply with local fiscal laws. Apologies for the issue.
Merry Christmas/Happy festivities to you all.
25% off until Jan 1St
Code: AmpyXmas2016 at checkout
Happy, peaceful and prosperous New Year!
Hello there,
we are running a 25% discount until Monday on single profiles and packs. You can use BLACKFRIDAY2016 in the coupon/discount field while checking out.
Have a good weekend.
Cheers!
I'm afraid it is not my choice but rather paypal's request not to use brand names (or similar sounding ones) next to products for sale. All the profilers using real names have apparently not been "caught" by checks yet.........
In case anybody is interested we have an original WT (Traveler) in our bass section.
Vox Night Train free profile added as well as a profile for bass players (Ampeg).
Display MoreHi guys
Just wanted to let you all know that A/M Audio had a potential hacker buy profiles from our site thew other day. It's still being looked into by our web host but here's the gist...
Received an order for $4.95 from a jouni saunamäki
email:
[email protected]
Here's the problem...what he bought should have totaled well over $100...close to $200. In my site's database where I can see orders and what was bought, etc...it doesn't show any products, just the $4.95
However, the paypal receipt email shows he bought basically everything for .99 each.
I'll update this thread once I get some answers but wanted you all to be aware of that name and email address.
Same here, same guy .......................
Not super rare but I'd love to see a Roccaforte HG100 and a David Bray Marshall!
We have had one of these (the HG) for a while now....
Sweet, liking this and your Dr Z Z28 one! BTW, these amp names on your site are killing me in the bad way... not smart enough to figure all of them out...
I am afraid the manufacturers are not happy to see names used in descriptions as well as logos and paypal is not happy to see any close resembling logos/names next to a "buy" button (not even a donate one apparently) regardless of the fact that what we sell or give away are recorded or if you wish engineered sounds where besides the amps that we own (paid for) the microphones, preamps, monitoring, studios include several decades of working on the field.
This may be different stateside as I see many using real names without problems or maybe they just haven't run in this issue yet.............
This is the reason behind names like Mesblu (one of the free profiles) for a Subway Blues combo, TW for Twin, or VAC50 for a vintage Vox AC50 and so on.
Cheers!
This is from a 1999 amp. Just added to our free profiles page. Four direct amp profiles included.
Last day for the Ampsound Bass Amp Pack 2 at 50% off!!! (ends Dec 31st, 23.59 CET)
edit: I got the messages, extended to Sunday Jan 10th !
As per Klappy's request above new profiles and updates of old ones now include Direct Amp Profiles.
The new Bass Amp Pack 2 is available with v3 firmware profiles and four Direct Amp Profiles per amp.
p.s. the new pack is half price (50% off until Dec 31st)
Older profiles and packs will be updated to V3 and Direct Amps added in the near future.
No worries. I just bought 5 different bass rigs from you. They are quite good and I expect to get a lot of use out of them. I've been a bass player for 30 years and haven't encountered many of those old 60s/70s British amps. It was a nice surprise.
I'm pretty new to the KPA. What is the issue with direct profiling? This is of interest to me since I will likely be using many of my profiles live with a bass cabinet. I'll have the speaker profiles disabled.
Unless I am missing something Direct Profiling is auto-sensing. Unfortunately it doesn't always work as the cab switches itself off even within a recording chain with microphone, preamp, eq, dynamics, bass cab, KPA return.... Not an issue for players but surely for profilers. I will try to add a few Direct ones with the sixties Vox I am finishing right now. I have a request list with Wems, Sunns, Majors, Boogies and many others, hopefully we'll find the time .........sooner or later .... 
Any progress on this? I'd like to purchase them when they are ready.
I have been doing some new ones as per production needs (see the Selmer MKIII and a forthcoming Vox), I'll get back to updating the older ones as time permits......
EDIT: besides all OS bugs and supposed improvements turning into worse performance and ease of use (the implementation of direct profiling being one, please issue a fix asap...) we have also been requested a couple of more gems and a whole list of boutique bass pedal in combination with vintage amps, hence the slowness ......... but we'll get there..
Are the profiles migrated to 3.0? Want to grab the bass pack?
Sorry about the late reply I didn't get a notification... just seen it now.
The bass pack will be migrated but this means we will need to make new profiles from the ground up so it will take some time. We have migrated the AV4B (Ampeg V4) and yesterday just added a new T&B Mk3 B (Selmer Treble & Bass).
Yeah I am also interested if new bass profiles were released using >= 3.0 firmware profiling method...
We have put new amps on hold and started upgrading our bass profile sets to "Firmware 3.0"
Time flies and there is never enough of it. Hopefully I will have some time to make some new rigs available around Christmas. In the meantime I have managed to record a couple of half serious/half funny videos thanks to some of our friends and customers. You can hear both modern and classic profiles as well as some bass amps
Display MoreTo your knowledge, fellow bass players, do you know if these amp profiles are available somewhere, free or not ?
- Trace Eliott
- Genz Benz
- SWR
- TC Electronics
- Glokenklang
- Jule (Monique)
- Epifani
- Carvin
- Peavey
- Hartke
I'd be more than interested to try these
Are you looking for a particular SWR or just any?
