Posts by Jemjulio

On W10. So I followed the uninstall instructions. Deleted the folder. Restarted the PC. Installed the Beta Version directly as I had it saved from when I updated.

Installed fine.

However, the behaviour persists.

In Local Library , I move up and down the list of Rigs with the up and down arrows. If I want to select a rig I press the right arrow. Rig gets selected with its little headphones. All good. If now I hit up or down arrows it will move through the list again. I believe this is how it should work. Correct me if I'm wrong.

Now, same thing but scrolling through the list in " My profiler" . The arrows seem to work normally up and down, but in order to select a rig, the right arrow wont do it. I need to double click with the mouse. Then, when a Rig is selected the name field on the right panel gets selected and down arrow will get you to the instrument type and it will scroll through that.

Just my experience.

Install went great. No problems.

Indeed arrows are acting strange though.

In browser mode If I select a rig, right click " load into editor and preview" then press enter, down arrow will move downthe rigs correctly.

If I just double click on the rig, the reported issue happens.

Just noticed that if you double click and double click again it also will behave ok..... I think...

I find your first post disturbing....

You can do the falseto thing... thats all I can say.

And maybe clear your throat away from the microphone next time?

Excellent service from Peter at Kemper support.

They will send a replacement Kone as it appears mine is defective.

Thank you Peter!

Mmmm... strange its doing it on such a high note. Mine is definitely related to low frequencies.

I've just done a few more tests and although at a certain volume EVERYTHING in the room starts to rattle, the kabinet is definitely to blame for what I'm hearing.

Lets see what support says

Quote from KnoxHarrington

14th position on the b-string is worst for me.

I assume that's a low B? 7 string?

Quote from KnoxHarrington

Hi,

I have the same issue. At first tightening all the screws seems to have fixed it but now it has returned. It seems to resonate at certain frequencies. 14th position on the b-string is worst for me. At first I thought other things in my studio were resonating but it's definitely the Kabinet after trying it in different rooms.

I've contacted Kemper support yesterday as I think it might be a manufacturing problem.

Interesting....

I have also been moving things around. Taking stuff out of the room, putting the Kab outside the room, using looper and looking for the origin....

Definitely resonating at certain frequencies as well, but I cant pinpoint it.

I cant discard it being a resonance in the room, but it also seems to come out of the Kabinet... Maybe in my case its both and they feed on to each other... I dunno...

Hi guys. I got the Kabinet in April and have always played at low volumes in a small apartment. Very happy with it.

Yesterday I turned it up a bit more than usual and got this farting/ buzzing noise. The B on the 6th string was the worst. Bass boost made it worse.

I took the back off and tightened the speaker screws and all the others ( bracing screws, handle, feet..)

Problem persists. I have emailed support but was wondering if anyone else has had this issue.

Thanks

+1

Not holding my breath though, as its not sound related.

IMHO, convenience is way down on the priority list . No disrespect.

Very cool that the suggestions have sorted you out.

I always find these cases strange as I cant get it to sound bad. I tweak nothing.

Question: I'm using the main outs with XLR- TS cables to my interface. Am I correct to say these are unbalanced? It certainly doesn't sound bad to my ears. Would I be better off using standard TS - TS jacks?

Peace

Aha! I see...

I could have sworn from the 2nd pic it was a notch

I thought you had accidentally made a tool mark ( right side v shape mark )

I often slip with the file making some deep notches...

@Ibot39 Mostly sandpaper because you nicked it with the Dremel?

You are not alone in your madness. I found my pick over 10 years ago, V-Pick Dimension Jr or Diamond 4.2 mm. But they are expensive and wear out so I file them. See pic. I find it very relaxing. Bought a mini vice as was destroying my fingers.

If you want to part with the thick Gravities let me know. The 2 in the top right corner look cool.

Hello !

So I discovered a few days ago, that the autoassign option in the rig menu doesn't work consistently.

Browser mode.

Sometimes its fine, sometimes its not. And I cant work out what the ones that don't work properly have in common. For a moment I thought it could be the amount of slots, but its not that.

What will happen is it will assign correctly but then some of the fx buttons wont do anything. Clearing and assigning manually fixes it.

Anyone else encounter this?

I saw there was a thread sometime ago and it was a known bug that was going to be fixed. Did it break again??

Autoassign Remote effect buttons doesn't work

Peace!

Cool display!

What are the last ones in row 3 ? The smaller one looks promising.

And the other box? Gravity? Wouldn't mind trying a 4mm Gravity? How are they?

But there are flames...and there are flames...

Got this one 2 days ago. Unbelievable playability out of the box.

Harley Benton SC Custom II

I dont care for the top ( wish it was like the back)

Things are very tough work/money wise here. But I sold 2 of my "expensive" guitars , a Heritage H150 and a Kotzen Telecaster, and refuse to just use the money for "life"

And at €200 I'm beyond pleased.

Animal is over the moon and has switched to playing guitar

Its hard, but if you can get over what it says on the headstock, these guitars are rising in quality very fast.

Harley Benton Fusion II

Amazing. Seriously.

Quote from Ruefus

That list is probably engineered to show higher-value items. No one wants to look at a list with Ernie Ball strings/Fender picks etc. as a top-ten.

And yet, there are the strings at #10

Number 3 just overtook number 2.... This is exciting stuff!!

Quote from Finally

It has to be based on revenue, not units.

This is the only thing that makes sense.

But how many €61 amps do you sell to make it to # 2?