That's not correct, the powerstage is limited to 600 Watt, when a 8 Ohm load is connected. Due to physic-laws the Output-power increases by square root of 2 when the load is halfened.
Posts by Hurricane
-
-
We should post this in "Feature request" again and hope that CR or mothership gives a Statement.
-
The Problem is not the power-stage of the profiler (if it is not driven at full volume over a Long period) but the Speakers. They obviously cannot handle the huge power of the profiler. 600 Watt at 8 Ohm would mean 1200 Watt at 2 Ohm
-
I guess my source was CKemper in this thread:
That would be most helpful. I'd highly appreciate this feature. For me it should be a must for all digital working devices, which feed the FoH directly.
-
The Thiele-Cab (1xEV12L) sounds most equivalent to what comes out of the FoH.
The TwoRock2x12" Mojo colours the Sound. Sounds and suits more to a rocking-set.
Since I'm a sort of old-school-guy (blues and stuff) I don't use high gain sounds, though I'd recommend the TwoRock 12-65B (a Derivate of a celestion G12H)
-
A cheap PoE-device solved this Problem for me
-
No you can't copy rigs from Browser to Performance via copy/paste
Please follow:
Choose the rig you Need in the Browse-Mode
Switch over to Performance Mode
Choose the Slot where you want to store your rig
turn the browse-knob once (the desired rig is indicated)
press "load" and three times "store" and you're done.
-
It's said, it will be possible to buy the Speaker-Chassis as a spare-part. So the solution for bass-Players would be an individual cab supplied with several Speakers.
-
Mesa Boogie Thiele 1x12" with EV12L
Palmer Cab 2x12" with Celestions G12H30 Heritage
Mojo Cab 2x12" with TwoRock 12-65B (which actually are WGS-Speakers designed for TwoRock)
and hopefully in the near future:
Kemper Kabinet 1x12" with Special designed Celestion F12X200
-
If there will be an "early bird Action" I'd like to get an offer.
-
Kemper Amps updated their facebook background photo with Kabinet connected to the Profiler Stage - guess it's the powered one
You're Right, if you mean the Stage-Profiler
-
Thanx, where can I send my backup to ?
-
The Approximation is Pretty amazing to me. Through my Alesis-Monitors both sounds are nearly the same.
I've got a silver-archer and played it in front of my Profiler loaded with the 63 Deluxe Profile. It got rather near to the Sound.
-
My Output-Presets differ in EQ-Settings. I've got Presets for the rehearsal-room, several live-Locations, rehearsals at home .
When I once loaded my "home-output-preset" I would expect that it maintains after a Restart.
I accidentially recognized that the first Setting in my Output-preset-list is loaded after a Restart. (this can be seen, just by activating the Output-section and turning the browse-knob one single step).
-
I've got several Output-presets. F.e. a preset when using the profiler at home.
When I load this preset and Play it the whole evening and afterwards shut the profiler down, I have to reload it again after a restart, because it doesn't maintain.
-
Thanx for your Reply. What should I do now ?
-
Is it correct that always the first Output-preset is active after switching the profiler on?
I loaded a different Output-preset but after restart it is always gone. As I supposed, the Output-section is always locked.
So it must be a mistake, isn't it?
-
Put the USB-stick into the other profiler.
The stick will be recognized after a few seconds.
Press the button above
Press "backup/restore"
Press "restore"
choose the wanted backup-file
Press the button again and soon you go
It takes some time, due to the rebooting of the profiler
-
Go get a USB thumb drive.
Insert it into the first Kemper and let it format it, and do a backup
When it's done, insert the thumb drive into the new Kemper, and do a restore.
You should be good to go with "cloned" Kempers.
But be Aware that also nearly every other Settings (Input, Output, Performances a.o.) are also "cloned".
-
Yesterday was a broadcast About "Musical Inventors in Germany" in the Radio.
There I learned that the Kemper Company has a staff of about 60 members worldwide.
I think it's ridiculous to complain About their Efficiency. For me it's exemplary !!