Fantastic, thank you so much.
For anyone who needs them here are the libraries I needed to download to get it to compile.
Posts by smfelton
-
-
If you are on a Mac i've got a Pixelmator file that I used.
-
Would love the code for this, in any state its in
-
Great work, fantastic !!!
-
The FCB with one of the popular chips is a great solution, hope you can get the Kemper Remote soon though as it is well worth it.
-
Hello and welcome !!
-
Welcome for reals !!!
-
Hey congratulations, that's fantastic !!!
-
I managed to pick up an old battered Mooer Little Monster (early Production sample) the other week very cheap. I re-did all the soldering inside as it was pretty poor. Once done it sounded really nice. I did a few quick profiles which are on the RE and will do some better merged etc profiles once I get my DI back from a friend.
Anyway it started out looking like a slightly battered version of this.
[Blocked Image: http://s10.postimg.org/6zgu7iwl5/mooer_little_monster_ac_630_80.jpg]
So I thought I would give it a bit of a visual makeover too. And so now I have this.
[Blocked Image: http://s29.postimg.org/h1wb38bbb/Photo_25_04_2015_16_13_43.jpg]
-
Just like we need FRFR to reproduce all the amps and cabs, you would need a piezo pickup as well as magnetic to cover the range of a guitar, that said with a 'full range' guitar it should be possible to "tone-match" to get close IMHO
-
+1 for Keka, but also StuffIt Expander - https://macappsto.re/gb/OUkly.m from the App Store.
-
Hello and welcome.
-
Hello and welcome. Congratulations!!!!
-
Hello and welcome.
-
Hello, and welcome.
-
On it's way, been busy but will try agin this week end, I want to be sure which PCB I recommend, the one i've got has speaker protection which, i'm not convinced is working right, so i've bypassed it at the moment. I've just got an oscilloscope and signal generator yesterday so I can have a proper look at it.
-
The main problem with getting it to fit was that I used crimp connectors on the speaker and power cables to connect to the amp boards screw terminals. When I measured and set things out I had not taken these into account as it was a bit of a last minute decision. It took me a while to realise these were the problem, but once I did, I bent them all to 90deg and it then fitted fine.
i had the amp on for around 6 hours yesterday which was the longest I had used it. It was warm to the touch but not by any means hot, so I was very pleased. -
Like was previously mentioned the most important thing is enjoy it !!! Put any mistakes behind you and don't let them phase you. Make sure you have new strings that a well stretched in, as an aside the NYXL's by D'addarrio are fantastic need next to no stretching in and incredibly stable.
Check all your leads, plug everything in and wiggle it all to check for any problems.
And my personal thing, and I know many disagree, don't drink too much before you play, save it for celebrating afterwards.
And you can spend 5 minutes warming your fingers up before you start.But like I said HAVE FUN !!!!!
-
-
Welcome along, definitely worth investing in some better monitoring, or if your computer has spif input which many often do now, you could plug the Kemper into that.