XLR Main Outs an den FOH.
Pegal beachten, der Profiler hat einen gesunden Output. ggf. im OUTPUT Menü runterregeln
Ja - bei unserem Mischpult muss ich -21db einstellen, damit es nicht übersteuert.
XLR Main Outs an den FOH.
Pegal beachten, der Profiler hat einen gesunden Output. ggf. im OUTPUT Menü runterregeln
Ja - bei unserem Mischpult muss ich -21db einstellen, damit es nicht übersteuert.
Thank you for sharing!
Welcome and have fun!
Put the maze also in the coffee cup and can't stop drinkin
Played so far only with the maze and the profiles have realy something special. It' so much fun to play with volume. A little more or less offers a big sound change. I can hear the amp breathing
Very well done Guido!
Thank you
You have the problem also with RM 1..5 R41?
Time for a new coffee!
you're right. I can't see mine either.
I'll investigate
thx
BTW Don your link in the footer Kemper Rig Packs goes to a 404 page not found!
Got the 3,5 ms in performane mode. I don't think theres a difference between the modes?!
But why we have this 1,5 ms difference?
Do you have some stomps active in your rig?
Pure cab off, no stomps only reverb here.
Thx.
No 5ms was in browser mode ,no effects, analog in and out.
That is not bad!
0,5 ms is not 5 ms
I can confirm this.
Back in 2014 I made latency measurement with the tool I mentioned earlier: Latency and current firmware
Few posts later there is a statement from CK regarding A/D /DA coversion times: "Contemporary AD/DA converters like the one in the Profiler add about 0.5 ms to the latency." Latency and current firmware
Welcome!
Hi
you need a usb b connection from KPA to your computer.
Choose a rig in RM double click and you have the rig on the KPA. If you like it you can store it.
Happy birthday!
Another VL3 user here but since I got the kemper I am only using it for vocals
Under category OS Beta versions
Recoreded a guitar with a splitter
Signal two comes 3,5 ms later, spdif out 3,0 ms later than the direct signal.
Running here with Firmware 4.0.2 and constant latency off and using a studio profile with reverb.
Wonder what's your signal chain and latency?
Yep now I can see it also!
I would fight for it. I see a star wars is coming ....
Kann mir bitte mal jemand über die Straße helfen wie man von 4.0.1 auf 3.3 kommt. Dann mach ich das auch, die 4er Beta bremst bei mir alles aus und der Support kennt nur eine Richtung: Vorwärts immer, rückwärts..
Eigentlich immer gleiches Vorgehen: kaos.bin der FW 3.3 auf dem USB stick direkt in das root Verzeichnis oder in dad Verzeichnis OS Update kopieren. Wenn der KPA gebootet hat, dann USB rein und es sollte die Melung bzgl. FW Update kommen.
Bin auch wieder auf die 3.3 gegangen.
There was a volume parameter in old delays which is no longer available in legacy delay. Could this impact the delay volume?!
if cab sim is off, pure cab does not change your sound on monitor out