Posts by hal2000
-
-
No, i don't. But if you all hear much difference it is clear now that i have a problem with my ears.
So i have to visit the doctor... -
Thank you kizzer
-
Hi Don,
unfortunately my cabs have different (fix) plugs, so that i can't use a switcher. I will make a record of
both cabs to check that.
But in the end i think i really have a problem in differencing tone. I checked the kemper tests of @kizzer
https://www.kemper-amps.com/fo…guitars-library/?pageNo=1
and i heard nothing change. -
Thank you. That is exactly what i was looking for!
-
I want to know if my ears are damaged, because i hear no difference in your Kemper Tests.
Can you say (blind, only by ear) which setup is which? -
@kizzer:
You have done a lot of work! Good job. May be my old ears are not able to difference anymore.
Are you sure, you have different tracks? I hear no difference, nothing.
I know the Kemper is good but i think some small things we should hear.When i make a profile and for example the mic is 20 mm of from center it sounds like a complete other
amp... -
Yes, you are right. It is so subjective. Perhaps someone made frequence graph or any other technical tests
except the ear. -
I know, there are a lot of threads with this topic but so much different statements.
Does any one has really good experiences in results with profiling as Studio, Direct and Merged ones?
What is the best method for quality and handling? -
Meine Empfehlung kennst du ja. Ansonsten würde ich lieber warten bevor ich mich so einschränke.
Aber ich weiß ja wie das ist, wenn man sich auf etwas freut.
Irritieren tut mich nur dein geplanter Kauf eines Mac Book Pro, das sicher mit 2000 EUR zu Buche
schlägt. Dann werden doch sicher 50 EUR mehr für ein Interface drin sein... -
Am besten ist es mal Tests zu den Geräten zu lesen, z.B. bei AMAZONA (Ja, ich weiß, ist Thomann aber zum vergleichen allemal OK.
Das Steinberg hat MIDI - finde ich sehr wichtig. Dann würde ich das mit den besseren Wandlern nehmen. Aber wenn es wirklich kleines Geld sein muss,
hol dir doch eines mit SPDIF gebraucht. Die Focusrites gibt es auch als USB und gebraucht kosten die auch nur 100 EUR. -
Hear Guido's Profiles from several Peaveys. They are amazing (for Rock too).
-
Na ja, anfangs warst du nur beim Thema Kemper aufnehmen
Seit geraumer Zeit arbeiten ja schon viele mit USB 2.0 (480 Mbit/s) und das klappt auch bei gleichzeitigen Aufnahmen tadellos.
Es spricht aber auch nichts dagegen schnellere zu nehmen. Die sind ja in der Regel abwärtskompatibel.
Manchmal gibt es schon ein paar Problemchen mit den FireWire-Treibern. Hatte ich auch schon. Aber eine Umstellung
auf den nativen Windows-Treiber und alles war in Ordnung.
Ich persönlich belaste mein Focusrite manchmal schon ordentlich aber 400 Mbit/s haben bisher immer gereicht.Ich würde aber unbedingt darauf achten, dass ein Texas Instrument Chip drauf ist. Der macht wohl die wenigsten Probleme.
Meine Karte ist diese: https://www.amazon.de/gp/produ…age_o03_s00?ie=UTF8&psc=1
Die läuft seit einem Jahr ohne Mucken. -
Über Adapter von FireWire auf USB kann ich nichts sagen. Für meinen PC hatte ich mir für ein paar EUR
eine Karte für den PC gekauft. Ich denke mal von der Geschwindigkeit und der Stabilität gibt es mittlerweile
nicht mehr so den Unterschied zwischen den beiden Technologien.
Mein Standpunkt ist sich ein Gerät auszusuchen, was in Punkto Qualität und Arbeitsweise passt. Wenn es
dann nur die eine oder andere Schnittstelle hat, besorge ich mir eben die Schnittstelle für den PC. -
- ob ich am Ende wirklich SPDIF benötige und dafür trocken das Doppelte aus der Tasche reißen muss?
Es kommt darauf an was du machst. Wenn du viel mit Reamping arbeitest und der Sound Produktionsqualität haben muss ist es ein Vorteil. - ob für meine Zwecke (nur Kemper) nicht schon ein Focusrite Scarlett 2i4 oder gar nur ein Focusrite Scarlett 2i2 2nd Gen total hinreicht?
Auch hier wieder: Wenn du nur den Kemper aufnehmen möchtest und sonst nichts, reicht das sicher. Die Qualität der Focusrites ist durchweg
gut. Es dreht sich bei dir also wirklich nur um die Funktionen, die du nicht brauchst.
Ich persönlich hole mir so etwas immer gebraucht. So habe ich mein Saffire Pro 24 DSP auch günstig bekommen und habe alle Funktionen
die ich brauche: SPDIF, Midi, Viele Aus- und Eingänge. Auch wenn ich nur 50% brauche, so habe ich immer die Option. - ob ich das Gerät nur - also anstatt meiner jetzigen Bratwurst Soundkarte - auch für den PC nutzen kann.
Ja, natürlich ist das auch für den PC als Soundkarte wunderbar brauchbar. - Hat jemand noch eine gleichwertige Option an der Hand (wenn oben alles mir Ja beantwortet werden kann), die womöglich günstiger ausfällt?
Gebraucht holen. Die Elektronik wird ja nicht nach einem Jahr schlecht...
- ob ich am Ende wirklich SPDIF benötige und dafür trocken das Doppelte aus der Tasche reißen muss?
-
Deadlightstudio:
sure, i checked locking but as i said, i can take cabs from other profiles and they sound different. -
Yes, all the same. Both profiles with SM 57. One with TC 2 x 8" cab.
And the other with EV 15L cab. -
Hi Forum,
i made 2 profiles with different (very different) cabs. But when i switch between both profiles i hear no difference
(and i should). When i take a cab from another (bought) profile i hear a difference.
Does any one has an idea what i'm doing wrong?
Thanks in advance... -
The pickup is a piezo glued in the box on the neck...
And @SpinnerDeluxe:
Herre is Seasick Steve with a 3-string CBG:
https://www.youtube.com/watch?v=8jcYdmD8FCI -
This is my latest guitar to motivate you all for building an own one. It is easy, cheap and makes a lot of fun in
building and playing. There are tons of tutorials in the internet. So go ahead...This is the actual sound with a piezo and kemper acoustic profile