Just checked their website.
- Two program change (PC) messages can be sent via different midi channels upon a single press of a footswitch.
I'm assuming that means two CCs on two different channels as well. If you're able to send NRPn on two channels as well, that's great.
No,unfortunately only two Program Change sends in this firmware version. What is the purpose to send multiple NRPN on different midi channels?
First unofficial firmware release for TB-12 is now available! Many thanks to GM Arts for amazing ideas and implementation! More about this release on BJ Devices wiki.
Some updates for Kemper users - KPA support was added to library. I have added all available parameters address, and implement a set of functions to get access to parameters address and values. Example demonstrate how to initialize bidirectional communication with KPA, get rig and performance names, IA states, and how to send change requests to KPA.
Also simple logger was added. Controller have usb port, which is USB-COM interface, and it is determined by the operating system as COM port, so you able to send debug messages to PC terminal and working with MIDI simultaneously. Sometimes it helps in debugging.
Some bugs fixed also. https://github.com/BurenkovS/bjdevlib
I have no idea what you're talking about
We start taking pre-orders for TB-11P from 1st of April at a reduced price - $265 instead of $310. Don't miss the chance!
TB-11P is the first MIDI controller by BJ Devices with built-in expression pedal. TB-11P is one of Travel Box Series controllers and it takes the best advantages of this series - the small size and wide functionality. TB-11P has new top and back print view and improved hardware.
What's new:
- Expression Pedal with multifunctional 3-color LED lines
- Power from the USB.
- Standard input polarity expression pedals (tip-to-viper instead of the previously used ring-to-viper). You can now use almost any expression pedal without cable modification.
- Automatic reset when upgrading the firmware. There is no need to turn off and turn on the power while updating the firmware.
BJ Devices TB-12 and TB-5 midi controllers is now open for all developers to create alternative firmware!Many peoples try to build midi contollers based on arduino or other platform, but the only problem is a make housing and reliable PCB without a tangle of wires. So now you have strong metal case with 12 or 5 reliable buttons, LCD screen, MIDI in, MIDI out connectors, 2 expression pedal connections, 2 relays output with total 4 relay
We now start to develop open source library to make firmware creation easily. You just need to install free Atmel Studio, dowload library from github , implement and compile your own firmware and upload it to your TB-12(5) via chip45boot2 bootlader GUI https://www.chip45.com/avr_boo…ega_xmega_chip45boot2.php
You can return to default firmware any time, last firmware version is always available on our website
First version of library is available on github https://github.com/BurenkovS/bjdevlib
And of course you are always welcomed to improve library and send pull request!
You can find out wiring diagram:
or tb-12 http://bjdevices.com/manuals/tb12_diagram.pdf
for tb-5 http://bjdevices.com/manuals/tb5_diagram.pdf
See README.md for more details
[Blocked Image: https://pp.vk.me/c416224/v416224174/10a6/L2bf6xny0X8.jpg]
BTW does is it accept 7 pin midi plug for phanthom power?
It accept power to pin 4 and 5 of midi out. We produce special midi cable for phantom power, which will work with Kemper http://bjdevices.com/en/catalo…ies/rean7-60-64-65-detail
Hi Jack. I'm BJ Devices's software developer, my name is Sergey. I'm not sure I understand your questions correctly, but I try to answer
I'm aware that, in Performance Mode, one can send MIDI PC numbers to two different external devices via two independent MIDI channels, but I only want to send them once for each performance.
TB12 able to send upto 2 different PC messages, no any problem to send just one message and switch on any performance.
If I look at Performance Mode as each Performance representing a specific song, am I right in thinking I would enter the the MIDI information only into Slot 1 of each performance and not enter any MIDI info in the remains Slots?
What do you mean "enter the the MIDI into Slot"? In TB-12 you able to set any Program Change number to any button and enter to any slot of any performance by one button push. If you don't need others slots except slot 1, just don't attach this Program Change numbers to buttons.
Forgive me if I misunderstood you
--
Best Regards
Sergey Burenkov
+7 903 580 02 86
http://www.bjdevices.com
Find us on Facebook http://www.facebook.com/bjdevices
Find us on Instagram http://www.instagram.com/bjdevices
If you able to use Control Change #16 instead of several control change messages for each stomp, you can pay attention on BJ Devices TB-12 or TB-5 midi controllers. It support bidirectional communication with KPA and you can assign any CC or PC numbers on one button.
BJ Devices TB12 and TB-5 with latest firmware is supported looper, but without looper status visualization.
http://bjdevices.com/en/catalog/products/tb-12-detail
Display MoreHey cedico
Happy to help.
For what its worth, if I did <b>need </b>a looper, <b> I wouldn't hesitiate </b>getting the Kemper Remote <b>regardless of its cost.</b>
All the best,
Ben
HI Gents,
my name is Sergey. I'm software developer in BJ Devices. We have added new feature in latest firmware version (2.4pb) - NRPN midi messages, so customers able to control looper, but with no back pressure(you can not see looper status). see short manual
--
Best Regards
Sergey Burenkov
+7 903 580 02 86
http://www.bjdevices.com
Find us on Facebook http://www.facebook.com/bjdevices
Find us on Instagram http://www.instagram.com/bjdevices
