I had problems with the remote connection.
it turned off several times during rehersal, sometimes it restarted by itself, sometimes i had to unplug.
i now use a PoE Switch to power the remote and am very happy.
A PoE injector will do, but i also had a router connected for the iPad control.
Posts by wrbi
-
-
Thank you Burkhard
I think I will leave it in natural wood for the moment.
-
If you have a PoE Switch you can use this adapter for powering the router
https://www.ebay.de/itm/233573706746 -
When the Kabinet was released i was happy to get the Camplifier, so i did not have a third piece to carry.
Last week i got a stage in addition to my toaster.
At first i was not happy with the Camplifier any longer.
But then i had the idea that made me happy again.
Now i can use the Camplifier/Kabinet with Stage and Toaster.
-
i want to replace the back panel of my cabinet and integrate the Camplifier in the new one.
now i am searching for the exact color fot the painting.
as i can see on my monitor, RAL 6000 might be the correct color, but i am not sure.
Does anyone know? -
I do not use the IPad very often. But having a POE switch is benefit enough for me, as I no longer have problems with the remote connection
-
Some time ago i also thougt it would be good to assign 1 FX to more Buttons.
But i think thigs will get too complicated.
Take your example:
Switching all 8 on at once. Then with a second Button turn 6 Off.
If you press again the switch for 8 stomps The remaining two will turn OFF and the others assigned to the 6-switch will turn on.
If you then have another switch with 4 FX assigned after a few operations of the different switches you will get nearly random results. -
2)
You can assign more than 2 stomps to 1 button on the remote. But only the first 2 are represented with LEDs
-
I made an Excel sheet that can help calculating the steps.
Easyer way to create user scales using Excel Macro -
I now have my perfect solution.
Now i built all devices mentioned in the above post inside my 5U Rack
Not much space left inside
-
You can use the „morph“ feature
-
Ich habe in dem Thread, den spotter genannt hat alle Teile aufgelistet, mit denen ich den Kemper direkt mit dem iPad verbinde (ohne Umweg über das Heimnetzwerk)
What is needed to add wireless to legacy Toasters/Racks for wireless app
Hab das letzte Woche alles zu meinem Kemper ins 5HE Rack mit eingebaut
-
Kann es evtl. am Parameter "Rig Change Cross Fade Time (Rig X-Fade Time)" liegen, der den sanften Übergang zwischen Sounds regelt?
-
There is a "MIDI Parameter Documentation" on the Kemper Download page
-
At the Moment 3 pedals.
left: wah (and evetually pitch)
right: Morph
even more right: Monitor Level to adjust the volume between songs at rehersal -
I now have my perfect solution.
The Links are only examples to show the product as most of you will not order from amazon germany.
PoE Switch: TP-Link TL-SG1005P
https://www.amazon.de/gp/produ…tle_o02_s00?ie=UTF8&psc=1
Router: TP-Link TL-WR802N
https://www.amazon.de/gp/produ…tle_o01_s00?ie=UTF8&psc=1
Y-Power cable
https://www.amazon.de/gp/produ…tle_o01_s00?ie=UTF8&psc=1
These two Products are on order:
Power Adapter for the TP-Link PoE Switch
https://www.amazon.de/gp/produ…tle_o00_s00?ie=UTF8&psc=1
Power Supply for the TP-Link Router uses PoE
https://www.ebay.de/itm/233573706746
Configuring the TL-WR802N as an Acess point was very easy and the connection with the iPad worked immediatelly.
I then had to do some research as the connection to the iPad and the remote broke repeatedly.
it was the "lease renewal" in the DHCP settings of one minute. i changed to Static IP and increased the interval to maximum.
Now it works perfect.
-
Maybe you had the input noise gate at a higher value when it sounded nice.
I once turned it down occasionally and had the same issue
-
I am holding off the tp-link because I would prefer the power supply on the tenda (the tenda uses a kettle mains cable like the kemper so I can get an adapter to power both) the tp-link uses a wall wart adapter which requires a socket (more space used up in the back of the kemper)
you could use this with the TL-SG1005P power supply.
https://www.amazon.de/perfk-Ne…ler&qid=1624634892&sr=8-5 -
I have also just tried an old device that I had laying around - Netgear WNCE2001
Success:
TP-Link TL-SG1005P and Netgear WNCE2001 worked immedeatelly.
WNCE2001 is connected to my home WiFi.
i connected:
- Remote
- WNCE2001
- Kemperto the TL-SG1005P
and the PC via USB
KPA + Remote + RigManager (iPad) + RigManager (PC) work simultaniously.
I will try again with the Vonets to connect direct to the Kemper without the home wifi. -
Ok i will try That.
But i would prefer Connection to the Kemper directly