Try TopJimi's profiles, ceriatone clones, but quite near.
Posts by Dragonsf
-
-
I'm using my Klon OD in front and an Eventide H9+LabSeries 5 preamp in the loop. Sometimes the Wah or phaser as stomp. If I need chorus/flanger/delay/univibe, I use separate boxes. If push comes to shove, I can always dial in my UAD effects, which are amazing truthful.
I hope the upcoming Blue Nebula will solve all my delay needs. -
Still wishing that Kemper had a Klon pedal model..
I have a built a Klon recently and I thinks, it's the best OD I ever heard. In combination with a Lab Series 5 pre-amp, I can dial in any Cipollina sound I want.
I had to do a lot of testing with the Klon - there was a solder bridge undetected - so I Think, it's difficult to model this pedal. The routing of the signal depends on a lot of things: amplitude, choice of diodes, gain pots settings etc. No an easy transfer function. -
I have also a problem with changing my password: nothing's accepted.
-
please take a look at our Bill Ruppert & Pitch Demo Rig Packs (June & July 2013): "PITCH Wide Sitar 2"
Does this still exist?I can't find it with the rig manager! -
-
Maybe the noise gate level is to high.
-
@ckemper how about a WORLD CONVENTION of KEMPER users? 2017 in New York? Recklinghausen? Sydney? erhhh, yup, where?
Tokyo!
-
Do not underestimate the system reset option. I had various sound questions that were simply discounted as it doesn't sound different. I eventually did a system reset and there was a noticeable difference. It might not be what you need, but if it turns out to be a fix it's rather quick and easy.
I second that. At one point I had only crappy sounding profiles (all of the ones I tested). After factory reset, everything was normal (=excellent). -
Uno4Kemper doesn't support looper out of the box.
-
You have tried a factory reset, but having the same issue after that?
-
The Eureka seems to have more functions (like looper, assign pedals to other effect parameters - other than wah or volume). I've ordered one a hope, it will work as advertised.
-
Not to distract from this thread but it's been asked here many times about the fcb1010... You can now buy the eureka prom chip that supports looper and more of course... 35$
I'm looking into that. Thanks for the advice. -
I'm interested. I can also think about MIDI through, so that the switch board works with Behringer FCB1010.
-
My first self-built guitar. It's a Carvin Koa body and neck. I did the finishing and building job.
-
Have you considred putting a Baby Gamma or something similar beneath the speaker? I got one for my DXR12, which tightened up the bass.
-
Hah, just saw this thread. That was my first impression as well - which the fellas here kindly addressed for me: Restoring All Factory Rigs & Reducing Fizz
Once you tweak it a bit and get everything set up right, you'll start to hear the difference in all the sweet amps available. Then you'll get addicted.
I think we need to post a "Hey New Guy, Don't Panic Till You Try This" guide...
Some kind of "Hitch Hiker's Guide to the Kemper Galaxy" -
I got my baby-gramma yesterday and now my DXR12 gets a tight bass. Thanks for the advice.
-
Grrrrrrrrrr...
The 18th is here.
The 19th is nearly over here! -
Yesterday I finished building my neo-vibe clone and I must say, the KPA uni-vibe-ish effects sound exactly as the neo-vibe doesn't. I have no idea, why it sounds so wrong. The sound is not far away, but something is missing. For the record: the KPA emulation is the closest thing I heard for a univibe simulation. I'm going to build a VC Phaser and try various LFO signals. That's the only reason for the reason I can think of at the moment.