I found that before a show if I rock the mission epk1 back and forth and calibrate its perfect. But if I dont sometimes I get a weird lag
Posts by spazmatron
-
-
Thanks everyone for the advice. I lowered the clean sens and everything is working great!!!
-
Wow thanks for the quick feedback this really helps!! If I change the clean sens will I need to increase the volume output for the clean profiles? Sorry for all of the questions.
-
I noticed more clipping on the gain profiles then the clean profiles and the tone was a bit more compressed until I back the db on the wireless. So if im reading this right instead of adjusting the wireless adjust the distortion sens down on the kemper to stop it from clipping the input? This is in comparison to the same guitar with different pickups.
-
I installed some new passive hot pickups in my guitar and noticed that the input led was lighting up yellow/red (hard to tell if it was lighting up red) most of the time. Reading through forums im confused as to which of these solutions would be better. I noticed that the distorted tone is more compressed if I do not do one of the following
1. Wireless Shure GLX-d lower DB by -3db
2. Play around with clean and distorted sense. Still confused by this. -
Mission has a new 2x12 green cab looks like a 4x12 but half the weight. Im just waiting to hear if anyone else has tried it or compared it to anything.
https://www.sweetwater.com/store/detail/KM-212P-GN -
My band Pivo twww.pviotband.com covered the Deftones at Kings in Raleigh for the great Cover up 2 weeks ago. I'm using sinmix be100 profile with an ep booster out front and the gain cranked.
https://www.youtube.com/playli…hePbwkuKiC-eGa0f9fKcF1nisCheck out @sinmix profiles if you get a chance they are way worth it!
-
Not sure if thats a good sign that they say to try with both cab sim on and off. Might pass on this one. I wish there were some good comparisons on youtube.
-
Same here. I love my old mesa 4x12 with blackshadow c90s but its a beast over 100+ lbs.
-
Has anyone tried the new mission 2x12 cab https://www.sweetwater.com/store/detail/KM-212P-GN
-
Can anyone point to how to set this up with the remote? I would like to use the looper button as the hold function if thats possible. I dont use the built in looper and currently disabled it so I dont accidentally turn it on during shows.
-
Is it possible to use the looper button on the kemper remote to perform the delay hold function.
-
Try turning off your PC beside the kemper I bet you are getting emf interference. If so plug the kemper to a separate wall outlet in another room and or get a power conditioner.
-
Try re-setting the kemper to system defaults then test without loading anything back on from backups. There could be a system setting thats been updated without you realizing it.
-
Crazy question but is cab emulation turned on and have you tried resetting to the default settings.
-
It could be the DI in your amp. Try profiling with micing the cab and see if you notice a difference instead of using the built in di, The di could be coloring the tone
-
Have you tried resetting your rocktron to factory settings you probably have a midi conflict. If you notice randomness try using this I had issues with weird midi signals with long cable runs and this cleared it up.
http://www.zzounds.com/item--M…LBIvHK9-wohPDxoCGWnw_wcB= -
+1 on the EP booster I have it on all the time in front of the kemper its the only pedal I use other than the built in effects.
-
The master volume knob on the front of the kemper. I havent changed any of the volumes in the ouput section in almost a year.
-
The main volume has changed from one update to the next. Its not a big deal I just turn the overall volume down but just thought it was weird that the volume level keeps changing on each update. Is there a list of what defaults were changed during the update so that I can revert any changes from one release to another