A compressor should be your first choice here.
Posts by musicmad
-
-
this sounds as if you have an open cable connected to one of the pedal inputs that is configured to work as a volume pedal. The open cable acts like an antenna and produces a cycling volume sweep that sounds like a tremolo.
Please check your pedal inputs and set all of the ones that you do not use to "off" on the corresponding pages in the system menu.
Sounds interesting. Might have to try that
-
Hi friends,
Back with a new solo for our Original Fire (band name) original (as in we wrote it) tune "Egypt" (working title). Just finished composing it last week:
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.Profile as (as usual) the free Guidorist Friedman PT 808 profile (love it) with my own effects.
-
-
It would be nice if Kemper could "spike" any stolen kpa unit with a very unhelpful and deadening software update.
There is a joke to be said here but I'll pass.
-
Hehe it's been 2 years. Don't remember.
-
The 3rd thread where you cross- post information!
So? Of course one should chip in if the information is relevant to more than one thread. That's not cross-posting.
-
Might be a workflow issue we are thinking about: The performance name is part of the performance. If you have the performance opened, you are in editing mode and your state will get discarded when you leave it. When you select another performance without loading, you will offline-edit it and it will be saved immediately. So it doesn't always behave the same.. This can be confusing - is this your issue?
This was on the list with different symptoms for a while, it is our plan to fix this for the next version now.
Okay I think I get it, finally The editor shows it all right, but the Rig Manager inspector and Cabinet Columns don't revert when using COPY/PASTE buttons.. Might be a side effect of something else, so I'll write it down and see if it continues after the next few changes. Thanks for the effort to make it reproducible
That is very likely. Thanks!
-
Question: When working on Profiler performances in Rig Manager do you ever need to hit store on the profiler? It's really unclear to me. I just tried this:
1. I changed the name of a performance that recides on my profiler so something else. It took a few tries before it stuck on the profiler itself. Do I need to hit store on the profiler? Or not? It seemed to stick even if I didn't
2. Then I changed the name of two rigs in the same performance, still on the profiler. This time it stuck the first time around. No store needed.
3. But now I can't get any name change on the profiler performance to stick (haven't tried hitting store since it doesn't seem to be needed).
How is this supposed to work? Can anyone confirm what the official stated procedure is? Do we hit store on the profiler or not when editing profiler performances in RM?
-
Sounds great thanks. Dig the Butterslax4 studio profile.
-
Your idea Burkhard. Your idea. We are not mind readers :). There are many more very good ways to use it.
-
Brought my Power rack to rehearsal today and after rebooting and switching to performance mode the active performance contained Crunch in all slots.
Luckily switching to another performance and back restored the correct rigs. Phew.
-
What's your process again?
-
Can one of you (or both) post a video of this happening?
-
...I just went out, turned on my Kemper..Went to "Performance Mode"..Pulled up a performance , went to a slot of mine that I worked on loaded up..turn the "Browse" knob so a different Profile loads up..I don't hit save,...I scroll to a different slot, then back to the one I was just working on, guess what? The new profile is loaded and saved (in that slot), my preset gone...I turn it off, and back on, go to "Performance Mode", my preset is still gone and now contains the new profile... It is SAVING. Again, my preformance preset slot no longer contains my profile....
Keep in mind that turning on and off does nothing as the edit buffer is persistent. You need to navigate to another rig in another performance and back in order the revert they changes.
-
This frustrates me too. Navigating to another performance and then back does not bring back your original performance. It just brings back up the unwanted overwritten performance. This bug should be fixed. I would rather have to manually save any changes through menu button presses than have it automatically overwrite your performance when it was not your intention to overwrite it. In browse mode if you tweak a rig and don’t manually save it and switch to another rig in the browser and then go back to the original rig your tweaks are not saved. Why can’t performance mode work the same way?
Even if you navigate to another performance and select a rig in it and then go back?
-
Navigate to another performance and back.
-
Yeah it's a good trick. Also see
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy. -
And also. Perform a backup right away if you haven't. We might lose the rigs on it if you don't.
-
That depends on your tempo setting for that rig. If you have tempo enabled for the delays it affects the tremolo as well. I don't like it either.