Posts by nicoroy123

When you try to reamp, do you see the Input LED flashing on the Kemper ?

If not, then you are not sending the DI signal back to the Kemper. (I got similar issue ressently).

So to trouble shoot that, you need to check all the steps:

-In your DAW, have you created an output pointing to the Digital Out of the Audient ?

-In your DAW, make sure your DI track out is configuted to use this DAW output, pointing to the Digital Out of the Audient.

-And then, in your Audient software, do you see any signal coming from your DAW to the Digital out ?

IMPORTANT: if you have a fader for the Digital Out in your Audient sofware, make sure it is fully up! (This was my problem).

-After that, you should see the Input LED flashing on the Kemper. If not, you may have a connectivity problem with your conversion dongles. They have a direction, make sure it is properly connected.

-Also, on the Audient, the clock source should be set to External. It's the Kemper that is supposed to be master.

Hope it helps

Quote from Burkhard

Rigs created with other PROFILER models are temporarily migrated when loaded into the Player. Effect modules C, D, X, and MOD don't show up, Effect types not available in the Player are completely ignored. Natural Reverbs will be replaced against effect tyep Easy Reverb.

All these migrations are temporary until you store that Rig in the Player. So if you don't store and transfer the Rig back into the other PROFILER, its original settings will show up.

If you edit and store that Rig in the Player the migrated format will become permanent. And if you retransfer the Rig into another PROFILER model, it will show up as you stored it in the Player.

Very clear, many thanks!

Question regarding how a saved rig would behave between Player and classic.

Let say I have a rig created on a Classic profiler with all 8FX slots populated.

And then I open this Rig on the player. Of course, only 4FX will be visible/usable.

And let say I tweak few things on the Player and save the Rig again.

Now what happen if I open this Rig on a Regular profiler ? Will I still see the original 8FX slots or I will only see what was saved on the Player ?

Thanks

Thanks guys, we need to be patient then.

I am reading in the Rig Manager manual about a lock function, to freeze a paramater to certain value even when browsing rigs.

However, on the player, I can't seem to find it anywhere.

Any clue appreciated.

Thanks

I agree to this idea. 6 FX blocks total with the abililty to move them before or after the amp would be very killer.

Yeah me too, instant buy as soon as they announce something!!

I agree to that, it would be nice!

Totally agree. Ready to pay the extra money to expand the player capabilities.

Just 1 extra fx slot before and after the amp block would be a welcome addon.

I love the Player a lot, expanding it's capabilities just a little more would make it the perfect product for me.

Quote from wcfieldskx

did they give you an estimate on when you might get it?

No, that's the problem. I called the store, they told me no ETA, even their reseller/warehouse have no idea...

Quote from wcfieldskx

where did you order from?

Moog Audio, Montreal.

Anybody in Canada received his unit ?

Hi, same question here. Placed my order on December 25th, from a Canadien retailer. Still no info about when it would ship....

+1 for a metronome!

It seams I found the problem. I had 31 profiles present in the Kemper that were impossible to sync to Rig Manager. They seemed corrupted because from the Kemper, when I tried to browse through them, the Kemper was stuck.
So I deleted all of them and now everything is back to normal.

Not sure what happened in the first place.

Quote from Cili

The funny thing about this mk4 pack is I used my old 2x12 vertical Boogie cab with old logo which I sold for some reason and now I regret a lot. And it took me only about 2h to make the whole pack...

That's funny because your Mark IV pack is actually one of the best out there for Mesa Mark/Petrucci tone.
I am still digging your Mark V pack, which is really nice too!

Hi guys,
Everything I start Rig Manager (after initially starting my Kemper), Rig Manager seems frosen, while I see on the Kemper a message saying Synching Rig 0 of 31. And after a while everything comes back to normal.

But the thing is I see this all the time when I start Rig Manager, even if I didn't make any changes on any Rig on the Kemper nor in Rig Manager.

It feels like corrupted Rigs or mismatch between Rig Manager and the Kemper.

Any way to fix this ? Any way to reset Rig Manager and make a full resync ?

Any help appreciated.
Nic

Hey thanks guys.

I will revisite Djemass' MKIIC+ profiles . Wasn't too convince at first. Maybe it is me who was expecting something else.

@sinmix, I will certainly try your profiles soon, they sound too freakin metal!

I got my Kemper 3 days ago. What an incredible device!

Bought it too! Amazing pack!

I am tempted by the Mark V. Anybody tried it ?

I hope he could profile a IIC+ as well...

Nic