thanks!
anyone tried it for toaster+remote+ep1 kpa?
it's the most affordable from all the option people suggested here
Posts by hendrix1406
-
-
i want always that the same button will assign the same block
without assigning it manually each preset every time...
on the kemper itself i can lock the stomps and effects.
can it be done somehow the same with the remote? -
Ive had Line 6 and Fractal gear that allowed for dual amps and found it more of a gimmick than a really usable feature. Its a lot of tweaking/matching and mucking around for not much benefit IMO.
I would rather see better overdrives/reverbs as a priority and then maybe an editor (if only to save wear on the rotary knobs).
cheersexactly my thought.and parametric eq on the main output
-
first of all i don't if you are familiar with this site.its a cool way too know which artist use what amp and then look for a matching profile.
for mid gain,classic rock and clean/edge of break i would choose any pack from mbritt or tone junkie,try listen to the demos on thier site first and then decide.
for heavy gain stuff i would choose stl or sinmix packs (dizel,mesa boogie,framus,bogner,engl,fiedman and ect..).
if your looking for free one i recommend you this packs they are not bad at all high gain profile of the mark IIC -
the most important factor is good quality profiles of course.
the factory profiles are not that great,so i'm pretty sure that if you'll have the right profile you will change your mind about the kemper
what you describe the distortion sound are you after?
can you name bands/amplifier with the sound you are looking for?
maybe i can recommend you a good profile pack. -
the eq on the master is so limited right now.
please please please -
short answer :
official rig packs
https://mark2cplusprofiled.jimdo.com/ ( Dje plays MM JP also and profiled extensively the mark IIC+ , also on Rig ex )
wow great profiles!thanks!
-
i wish there will be an option of switching between them exclusively like the volume/wah mode..
-
ok here is an update.
kemper finally respond my inquiry and this is what they said:"The only pedal link function where both functions work exclusively is wah to volume.
When you use a pedal configured as morph and activate the morph to wah link,
the pedal will control both functions when both are used in the same rig"
so lets hope they will make this option on the next update -
what function the exp should be? wah or morph?
if i choose wah the wah is the only one moving on the calibrate.if i choose morph they both moves on calibrate.
but like i said before,when i turn on the wah the morph still running, i want it to go off when the wah is on. -
have you tried with your mission and kemper?
if i turn off the wah the morph does not work (either mine is malfunction or either it's not possible).
would you be kind and check if function like you say it suppose to with your rig? -
nope, did exactly that and still no go...
-
System menue page 5/18, setbox MorphPedal to Wah
thanks for your comment.
of course i tried it,but if i am in "wah" function -the morph is not working at all.
if it's on the "morph" function is "on" all the time when even when wah is on .
i want to switch on the wah and that the morph will go off,like volume/wah option..i'm a bit disappointed with the kemper support department that until now i haven't got an answer.
-
i sent the support this question a week ago and still no answer...
i want to switch between wah mode to morph mode by switch but its not working.
i do succeed to switch between volume and wah but not the moprh and wah.
is that even possible or am i'm missing something? -
-
i'm using mission exp. and try to switch between morph and wah.
tried to find a tutorial and just didn't find any (i did had find only pitch/wah or volume/wah tutorial).
can someone here help me explain a exact setting parameter for this one?
. -
THANKS!
This is very helpful and you can download the wah's from the link under Nickys signature. I noticed that a lot of wahs will be over the top when the mix level is too high. For clean sounds i reduce the mix a lot. Try to experiment with the mix parameter.
Cheers
Frank -
thanks man!
definitely helpful post i will check them -
I have the same problem. It doesn't occur all the time but I can't get to figure out when it does this.
I did notice however that it seems to do this more often when playing at loud volume. Feels a bit like feedback to me.
Especialle when playing high notes at solo's it does this.Does yours have this problem all the time as soon as you connect it?
yes every time im moving the pedal from closed to open state,especially on the clean tone...
i want it to stay clean and its sound overdriven -
Where did you place the Wah? Best is early/first in the signal chain, e.g. stomp A.
yeah i put it on stomp A....