The initial request was:
Performance Mode: Please give me the option to save the on/off state of Pedals I-IV when switching slots within a performance!
Kemper Support #1 Any chance to get this option in near future?
Stefan
The initial request was:
Performance Mode: Please give me the option to save the on/off state of Pedals I-IV when switching slots within a performance!
Kemper Support #1 Any chance to get this option in near future?
Stefan
Just had a look at the Manual Addendum ...
When setting the Stereo button to "-100", would this turn the delayed channel to the left side?
In the addendum I find only this
Controls the stereo width of the double tracking. Plus or minus 100% is regular stereo. Higher values introduce the
super stereo effect.
Thanks
Stefan
Just another question to someone from Kemper team ...
I guess the the "Looseness" knob influences the delay time of the delayed (right) channel.
What does 0 to 10 means in ms?
Thanks
Stefan
Thanks Christoph for that explanation and the "confirmation" that the right channel is the delayed side.
Now I read some articles about the Haas Effect and the Precedent Effect and learned some new things.
In the rehearsal room the left speaker is closer to me and I guess this is an additional reason for my impressions.
I will trying turning left/right channel .
Suggestion & Feature Request:
What about having the possibility to influence this left/right balance in a certain range?
Maybe in the Rig Manager on the Double Tracker Settings Page having a knob beside the volume knob like:
"Boost delayed Double Tracker Channel" or
a knob "Double Tracker Balance" or something similar.
Again Many Thanks to for the responses and explanations!
Stefan
This is a known "problem", but it seems that Kemper does not care about.
Any statement from Kemper Support to this?
I just checked the YT Demo from Thomas Dill and I have the impression that there is also one channel a bit quiter.
Can anybody confirm this?
Many thanks
Stefan
Hi Guys,
I have set the Double Tracker to:
Looseness: 5.0
Stereo: 100%
Detune: 0.0
Volume 0.0
Profiler Stage Firmware: 8.7.10.38833
In the rehearsal room using the PA, I have the impression that the right channel ist a little bit quieter then the left one.
Any ideas from anyone?
Thanks
Stefan
+1
Possibility to decide for each effect slot if it is pre or post and a kind o numbering for the position.
Hi,
ja kann ich. Ich hatte ja vorher die Headrush FRFR 108.
Die Headrush hat etwas hohl und pappig geklungen, das macht die Junior EX nicht.
Die Junior EX ist ist auf jeden Fall um Klassen besser. Für mein Zwecke ideal, funktioniert laut und leise gut.
Für mich wichtig war die Größe, weil ich die Box zuhause und auch im Proberaum benutze.
Die Box funktioniert für beide Anwendungen seht gut (vielleicht kommt ja irgendwann noch eine passive dazu ;-))
Laut Instagram benutzt Marco selber live 4 Stück der Junior EX.
Obwohl "nur" 6,5" Speaker, ist der Bass absolut kein Problem und die Box hat ordentlich "Wumms".
Ich hab die Version mit EQ und Volume Regler genommen, dann kann man schnell und unkompliziert den Sound etwas anpassen.
Ich hab die etwas kleiner Version, 38 x 38 cm (die Standard ist 40 x 40cm)
Dadurch dass die Box stereo ist, funktioniert auch der DoubleTracker von Kemper und klingt gut.
Ich hab mir zusätzlich noch die "Fender Tilt Back" gleich montieren lassen, auch ne gute Sache!
Handwerklich ist die Box hervorragend gebaut, da gibt es nix zu meckern. Bilder davon gibt es auf der BlueAmps Instagram Seite.
Ich kann die Box uneingeschränkt weiter empfehlen, aber das ist natürlich Geschmacksache.
Ich empfehle Marco einfach mal anzurufen und deine Anwendung zu schildern.
Mittlerweile gibt es eine ähnliche Box "CUBO" mit 2 x 8" Coaxi Speakern (die Junior hat 4 x 6,5")
Grüße
Stefan
I also have have a small room and happy with this ones https://www.ikmultimedia.com/products/iloudmtm/
Really good sound for all volume levels and calibratable .
I had a similar issue, Main Out Stereo with DT to studio monitors/recording interface and monitor out to powered mono Monitor Box which did not sound really good with DT enabled.
Not sure if this is also a solution for you: I decided to use a small powered stereo monitor box „Junior Ex“ from BlueAmps.
With this solution I am now really happy.
In ca. 3 Wochen kann ich was zur Powered Junior EX von BlueAmps sagen
Stefan
Yep, I also would like to have more Software Stability !
Stefan
In that case you might benefit from a temporary bug, which slipped in with other modifications. Your statement is only true, if you load Slots via MIDI control changes #50-54. It's not true, if you load Slots via MIDI program changes. But this temporary bug has been fixed since OS 8.7.5. Current software works as specified in the manual.
A few users have already raised a feature request, making this behavior optional.
That would be a great enhancement
Thanks burkard for clarification!
Stefan
Hi,
I just figured out, that the effects state is also preserved when switching the slots via MIDI and Rig Manager ist not connected .....
Just as a reminder, I would really like to decide to preserver on not to preserver
Stefan
Thanks for that Info!
Hi Kemper Guys,
I have configured a pedal on as a BOOST pedal at the OUTPUT position.
All works fine as expected.
When the pedal ist not plugged, then the default position is at 100% (Volume Pedal in PEDALS Menu: 127)
Can I change this default to the minimum position?
Stefan