the PROFILER has a pretty healthy output level - are you sure you are not clipping the input of your audio interface?
The gain of the interface is set to around 18dB and it isn‘t clipping.
the PROFILER has a pretty healthy output level - are you sure you are not clipping the input of your audio interface?
The gain of the interface is set to around 18dB and it isn‘t clipping.
Thanks guys! I totally got the idea with 'Amp in the room' vs. 'close-mic'ed guitar cabinet' tone.
The real Cabs are cutting so many overtones that it seems warm and organic to our ears.
It‘s weird that we still are used to the sound of the chain with mic'ed option. The Pure Cab function truly helps a lot.
Now I don‘t even remember if it was on or off before but setting it on around 9.5 seems to be a good solution.
But I still don‘t know which output seems to serve best when going LineIn the DAW.
I‘ve read that the SPDIF out contains most of the full digital information?
If you are running direct into a recording console, you definitely want the cabinet enabled, and this selection will have a tremendous impact on your sound overall. The settings are in the STACK menu.
Here they are. So it depends rather on the Amp and Cabinet I‘m using than on the output?
Should I use another output instead of Monitor Out?
What power amp and cabinet do you have selected?
Where can I see these settings?
Btw. when turning off the cabinet it sounds even more grainy and digital like.
The cabinet definitely smoothes/softens that out a bit.
What power amp and cabinet do you have selected?
I‘m using the patch: MB 5E3 Luxury Tim
What is the best output to use when going LineIn into a DAW?
I had to upload to the latest BETA OS version. Now it works!
Does anyone have any suggestions on getting an organic and warm rock kind of distortion sound with the Kemper while recording through Line-In?
As we know amps are generally made for guitar speakers where they sound great. But when going straight into my audio interface and to my DAW the Kemper sounds awful.
Pretty digital and glassy.
I‘m using the 'Monitor Output'.
So my chain is: Guitar -> Kemper Power Rack -> Roland Octacapture Audio Interface -> DAW.
I just want to get more or less same sound as I hear through my guitar speaker (Fender Hot Rod).
I‘m not aiming for a heavy metal sound which seems more easy to get with the given presets.
Greets,
Owen
I will check it! I am using a USB Hub which is power supplied but it could be the reason. Thanks!
Thanks! Anything I could do to make it connect?
Hi everyone,
1. I‘ve installed the new Rig Manager 3.0.82 (15602) and I miss the editor section. It just looks like the old Rig Manager (screenshot 1).
What am doing wrong?
2. It also doesn‘t allow me to Load any patch into the editor and prelisten it like I could do before in die old version (screenshot 2).
I‘ve updated my Profiler Power Rack to the latest 7.1.5. operation version.
Please help
Owen