Just updated to latest version successfully. I thought I could copy an effect from a performance slot with the editor.. Does not let me do that... So I guess you have to do it in browse mode? How to see a slot from performance mode in browse mode then? Thank you
Posts by chaijens
-
-
Is it possible to put the freeze on a footswitch then solo over it with a different tone?
Or is changing the tone only possible when looping?
-
Hmm the thing is I don't get this when playing through my Zoom or other amps.
I get this only on the Kemper.
Here is another example. Friedmann Profile
https://soundcloud.com/chaijen/test
The open G chord creates a Feedback. The E chord does not.
-
I am getting a strange feedback kind of noise whenever I hit an open G chord (afterwards)
Happens with any profile with a bit of gain. Does not happen when playing other chords.
I am attaching a file where you can hear the noise/feedback after the G chord and you will notice that it is not there when playing an E chord afterwards.
Playing directly into my Apogee Interface. Kemper Output Level is -12Db Using a Telecaster.
Increasing the Noise Gate on the Kemper does not change anything. No clipping on the sound card either. I can't figure out how to get rid of this noise. Any ideas? Audio attached
-
Got my new thumb drive today (yea).
I had uploaded it some time ago, but have tweaked it a little and re-uploaded it today.
Search for "U2 Streets".
You can play around for more feedback on the 2 delays, or to get a different mix of the 2 delays (in the dual delay) to get the desired amount of repeats. Also the main effect mix seems to have a pretty profound effect on the sound as well.
Let me know if it is close for you.
Thank you very much. I had the chance to try your patch. The delay setting is really interesting and I can work with that. I am just trying out a few other profiles and reverbs with it. Very helpful indeed. Thanks!
-
OneEng1 yes i would love to try out your preset!
-
OK. So I got something to work with. At least for "Pride". Not perfect yet
Here is my tone sofar.
https://soundcloud.com/chaijen/kemper-pride-test This is done on the split position of my Vigier. ( It does sound better with the Tele)
It is based on the Tonejunkie Preset . I edited slightly and added a Delay in front of the amp.
What I find strange is that I had to use the legacy delay. The Dual Delay would just not work.
Still struggling with the settings for "Where the Streets have no name". Also tried a few profiles from rig manager. But the important "Delay popping" for the repeats is just not happening..yet
-
The actual way Edge got the sound he got was by going into a single delay that did a quick slap, then stereo out into 2 mono delays set to different times. The output of each delay went into a VOX AC30. The two amps were placed side by side with some distance between them (I think it was around 1-2ft). By having both amps mic'ed close together, there was some ambient bleed from one into the other which finished off the chain.
I have a rig with this in it; however, I currently don't have a USB drive (just moved and it is one of the many "missing" things) to post it here with.
If you are interested, I could try to put it up on the rig exchange. Also, I posted a thread with the settings a while back that you can search for.
Yes i would love to try that out. Thank you
-
Thank you for all suggestions. Will certainly check the ToneJunkie fx preset later today, i like their stuff and bought quite some..
The Maurizio ones do not work for me
Otherwise, please note that i perfectly know what tone i am after and how to dial it in in (I played in a U2 Tribute band a few years back and had no problem recreating all tones with my Zoom G3X.
If I could just make the delays sound like with my Zoom G3X here (Pride cover)
This is me playing through my Zoom here. And this is the delay sound I would like to recreate in the Kemper.
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.Of course there is always the option to put the Zoom in the effects loop. But I would really like to use just the Kemper
-
I am having problems dialing in the standard Edge U2 Delay setting 1x dotted 8th + 1x Quarter note Delay on the Kemper to make it sound right.
With my Zoom i have 0 issues nailing the delays perfectly but for some reason on the kemper either the repeats do not cut through or it is too unclear.
I tried the Dual Delay, 2 single delays, some profiles from rig manager.
Maybe somebody has a useful U2 Delay setting to share?
-
das foh signal dann ohne die gitarre nehme ich an?
-
Thanks for the suggestion. 13 won't work. The thing is just that at 12 it does work, but I have to really push the pedal and lift my heel to make sure it really hits the octave.
-
I just got a Mission Expression Expression Pedal and was able to configure it thanks to the wonderful tutorials from Thomas Dill.
I have a strange thing with the Pitch shifter/Whammy. If I use a one octave up type whammy I literally have to push the Expression Pedal with a lot of force to get the full octave. Otherwise It will only do something around 11 semitones which is horrible.
Pedal is calibrated and works fine for volume and wah
Is there maybe a setting in the pic shifting or a special setting for doing whammies I have overlooked?
Many thanks for any help
-
As I use 2 Macs with different OS versions in the Studio:
Can I update my Kemper to latest Beta and still access it with old Rigmanager version?
-
Of course i tried the page button. When I hit it after selecting the Dual Delay the menu changes to Reverb instead of showing Dual Delay Parameters. Every once in a while it does show parameters. I'd like to understand what might be the reason.
-
When i select simple delay i get shown all parameters (Mix etc) directly.
However, when i select Dual Delay I dont get to see the delay parameters?
How can I with simple delay selected just change to dual delay and still see mix note value feedback etc?