Cabinet switching not showing up in From Rigs??

joedreamliner787 · Oct 8th 2015

Hi everyone,
I received my Kemper today and I am finally down to tuning sounds. I am having some trouble trying to swap a cab for a different head. Here is what I did.
- Fired up Rig Manger
- Deleted all the profiles in there because all I need are a few
- Found my favorite EVH 5150III cab for a profile on rig exchange
- Found my favotire ENGL amps on rig exchange
- Loaded them into Kemper via the Rig Manager
- Selected the amp I want (Engl Powerball II)
- Held the "Cabinet" button
- Rotated the "Browse" knob
- There is is nothing listed in the "From Rigs" section???
- Basically I am trying to take the Cab from one profile and apply it to my current profile but despite having a few profiles with different cabs none of which show up in the "From Rigs" there are a few in the presets but that is all.

What am I missing here? Any help is greatly appreciated! Thank you!

warlus1 · Oct 8th 2015

... Os 3.14?!....

Import the rig (amp+cab) in your kemper.

Yes, you see 0 cab.

Now, clic "save" then "replace" or "save as".... And now, you can see/change the cab.

joedreamliner787 · Oct 10th 2015

Quote from warlus1

... Os 3.14?!....

Import the rig (amp+cab) in your kemper.

Yes, you see 0 cab.

Now, clic "save" then "replace" or "save as".... And now, you can see/change the cab.

Display More

That worked! Thank you! I did already update the FW to the latest.

warlus1 · Oct 10th 2015

it's a bug...

the solution is to do a full reset ( and lost all yours rigs/perfs) . After the full reset, it works like before

joedreamliner787 · Oct 10th 2015

Bugs are never a good thing but at least Kemper seems to be on top of them hence why I choose it over the AxFXII. How do we do a full reset? Does this roll back the firmware at all?

warlus1 · Oct 10th 2015

you keep the firmware but flash all the memories (browser and performance )

keep pressing the 1st button (left/above the screen) and start your kemper

joedreamliner787 · Oct 10th 2015

Thank you for the tip, I will give that a shot when I get home after work. Much appreciated!

DamianGreda · Oct 10th 2015

Quote from warlus1

it's a bug...

the solution is to do a full reset ( and lost all yours rigs/perfs) . After the full reset, it works like before

Wrong way - there is a simpler solution:

Don't do a reset - push system**censored by myself(hidden feature)**.
Go to bar for a drink.
When you got back - the rigs will be converted:D

warlus1 · Oct 10th 2015

thanks, i don't know this tips!

spikey · Oct 10th 2015

Quote from DamianGreda

Wrong way - there is a simpler solution:

Don't do a reset - push system**censored by myself(hidden feature)**.
Go to bar for a drink.
When you got back - the rigs will be converted:D

Do you mean that there is a cab reset in the system sub menu? Sorry Im a bit confused on what you do once you push the system button. I do not have my KPA yet and just trying to get ahead... Thanks

DamianGreda · Oct 10th 2015

Forget about my post -i have to rmove essential data. Please send question to support e-mail. Or @timo maybe send you an answer how to do this.

joedreamliner787 · Oct 10th 2015

Found this in another thread. Worked like a charm!

Switch the main knob to off
Hold the left/top soft-key above the LCD
while still holding this key - switch KPA to tuner
Maintenance Module will be started
In the 'Maintenance' menu goto 'Memory'
Use Memory FormatFlash and InitFlash
Check if the KPA works (booting, tuner)
Check all the KPA settings

I will add, go into the SYSTEM block and hit Factory Rigs right most soft button. This restores all factory defaults.

spikey · Oct 11th 2015

Thanks Joe! I will assume this information is all in the user manual too... My biggest fear at this point is deleting something via an update install, that I can't put back...

joedreamliner787 · Oct 11th 2015

Spikey I just responded to your thread on how to update the Firmware. Go check it out! And Welcome!!!

timo · Oct 11th 2015

Quote from warlus1

the solution is to do a full reset ( and lost all yours rigs/perfs) . After the full reset, it works like before

Why do you loose any data? you should make a backup before, initialize and restore it. At least send the backup to support so an investigation can be done.

warlus1 · Oct 11th 2015

And why restore it? Because the full reset erase all data.

Lokasenna · Jan 23rd 2016

Did this bug ever get solved? I've run into it a few times now, and while I can solve it by saving the cab from each rig as a preset it gets pretty annoying.

Share