I know there has to be a way to do this, but for the life of me I cannot figure out how. I know this feature is useful to some, but I do not want this on, it only annoys me. When I roll my expression pedal / Volume all the way back, the tuner graphic covers my performance on my remote. I do not care to tune my guitar everytime I turn my volume knob down, instead I'd rather see my performance slots so I can see what what I'm doing! I play in a very unplanned environment where it is important for me to have several sounds available to me at any given time. When I roll back my volume and look down at my remote to see what rig I want to move to next, I can no longer see them. I have to remember what I saved into what slot. I would love to be able to turn this feature off. If I really want to tune, I'll just press the tuner button. There must be a soft button somewhere in the Kemper to turn this off right?
I DO NOT want the tuner graphic on when my volume pedal is down!
- KPA_Leader
- Thread is marked as Resolved.
-
Not AFAIK. You might consider using the Vol. pot on your guitar. I do not know whether it is possible to calibrate a pedal so that it does not "go down to zero", that might be a solution for you. However, it might also mean, that the volume isn't shut off completely.
-
I do not know whether it is possible to calibrate a pedal so that it does not "go down to zero"
I do have a Roland EV-5 and a Boss FV-500 H. Both have a potentiometer for min level. Calibration I made with Min-Poti to zero level.
I loose a little of the range but I can compensated this with the range of Volume.
I never have zero volume via Pedal and see not the tuner.A good tip is to mark the Min Position if the poti is moved during transport.
-
Try setting the range of the volume pedal to -4,9 in the rig menu.
-
Try setting the range of the volume pedal to -4,9 in the rig menu.
This. -
-
I clicked "lock volume pedal" in the rig menu and it turned off that tuner function.
-
I clicked "lock volume pedal" in the rig menu and it turned off that tuner function.
Thanks! I will try this later!
-
I clicked "lock volume pedal" in the rig menu and it turned off that tuner function.
No, this alone will not do. Volume range must be set from -5 to -4.9.
-
hmmm...it worked for me this weekend. Tuner only turned on when I hit the tuner button on the remote.
