Behringer FCB1010 MYSTERY again....

Hi, just wanted to share to you fellows who are planning to use Behringer FCB1010 with KPA:

-I have one FCB with UNO 1.02f FW and it works perfectly with KPA
-I have tried two other FCB:s with different UNO FW:s and lefty expression pedal do not work (and sold them away)

Now, once again, I decided to try once again: I bought FCB and UNO 1.02f from ebay, loaded absolutely
the same programming as in that working one (calibrated pedals etc) -and once again:
the lefty exp pedal does not have any affect. Righ is ok, as earlier...

Im lucky that the one works anyway...

Somebody having the same problem..any suggestions..?

-Olli

Quote from DocLine6forum

Did you perform a pedal calibration as described in the manual?
You should do this once.

Yeah, calibrating done (twice for sure) as I described in my earlier post.

The odd thing is absolutely that the other FCB works with the same programming and chip...
Everything else is working, just that lefty pedal (as with my earlier FCB:s)

Nobody has this problem?

-Olli

Yes it should, and the same chip!
Ripwerx editor.
It is the same situation as with the earlier FCB:s: lefty pedal cannot be used at all, I tried to wah and volume -no any respond.
In my working FCB there is exp A as main volume and exp B delay mix.

-Olli

Quote from DocLine6forum

Completely resetting the non working board doesn't help?
Also, if you Programm the non working board differently, is there anything useful to do with the left pedal?

If not it must be broken (again).

I tried to make some differencies to programming without succeed.
And: the left pedals value-numbers can be seen in that FCB-screen but nothing happens.
Earlier with the other pedals in the same situation I did even checked with Midi-Ox program that the values came out., and they did -KPA didnt respond to them anyway.
I really cant understand cause this is the third pedal I have tried with Uno and KPA without exp A working...And the one (luckily) works..
This IS mystery

Oh my
-I did check out with MIDI-OX program:
FCB is sending just right data at right channel -but KPA doesnt react to cc7 volume exp A at all..

IT WORKS NOW!
Cant explain why....suddenly...mystery solved!

Thanks guys for being helpfull, again!

-Olli