Multi-band compressor with attack, release and hold times adjustment
Posts by hiflyerint
-
-
Plug the stick into a computer and see if it reads it.
Yes, I have verified the stick is still good and that the previous back-ups remain intact.
-
I've noticed recently when I attempted to back up my Stage unit that 'USB Stick' no longer appears at any time above soft button 3, and I have not been successful in finding it in any of menu's. It had worked in the past and I've never removed it until recently just to verify that the stick is still good. Any suggestions?
-
We need definite information. Otherwise we might be wasting lots of time and effort.
My unit definitely displays Release 8.7.8, build date of 07-13-2022 on Systems last info page...
-
And that installation was successfull - so 8.7.8 gets displayed on the last page of System Settings?
I didn't check on the System settings page but assumed a successful install as the unit re-booted normally as with other firmware updates. I can verify though when I return home today.
-
Have you really installed OS 8.7.8? How did you get it? I don't find any tracks, that you downloaded any OS update package!?
Please open a support ticket here:
Yes, I did install 8.7.8 via Rig Manager as I have indicated.
-
I installed the update and this just occurred again. I'm pretty sure on the same performance as before, when switching from rig 3 to rig 2. Input source was set to Input and changing it to/from Input source did not remedy the issue. Unplugging expression pedal did not help also.
-
A faithful Electric Mistress emulation would sure be nice, that way I would not have to run an effects loop in all my rigs.
-
I find it more practical to just use an external looper pedal and put it in an effects slot. One thing nice I've discovered with the Kemper is that I can record a loop on one rig and then switch to/from another rig also utilizing an effects loop and the looper playback is seamless.
-
Please check out OS 8.7.8, which is currently available as public beta. It should avoid this issue.
How do I download it?
-
Which OS version are you using?
Is any expression pedal connected and what if you unplug that pedal from the Stage?
Can you still control Tempo via TAP button?
What if you reset all global settings via "Init Globals" in System Settings, while the issue is present?
I did have an expression connected at the time. This occurred when I switched from rig to another in Performance mode. Unfortunately I did not have the presence of mind to check if the input source had changed. As far as tap tempo, I don't use it. Changing to other rigs or Performances did not remedy the issue, only when I performed a hard reset. If this occurs again I'll be sure to check these things. I'm running 8.7.6, which I had installed a few days prior.
-
This happened yesterday when I was switching between rigs in Performance mode. This occurred with Rig Manager not connected and not in edit mode. When I switched from one rig to another the monitor output went silent and the Input LED was not indicating any input. I verified the guitar and cable and that the unit was getting signal to the input jack. Switching to another rig or performance did not help. When I cycled power (remove power cord and plugged back in) to re-boot the unit everything was working again. The unit has the latest software installed. First time this has happened but didn't leave me with a warm-fuzzy feeling...
-
I have a Quintessence pedal in my effects loop. To me it just sounds much better than the Kemper for harmony and octave playing.
-
Lately I've been trying to re-create a sound similar to Page's solo for Fool In The Rain, where I've read he used a MXR Blue box for the tone. The actual song I want to cover is Rose In The Heather by Nazareth, which sounds somewhat close. So far I've come up with using a Kemper Fuzz and analog octaver, along with a flanger. Just wondering if anyone has attempted the JP Fool In The Rain tone?
-
I've also noticed some noise problems and at first thought it was a bad cord or connection.
-
Yes, shielded cable for sure
-
-
True, a speaker’s quoted impedance is only a nominal value (measured at kHz I think) as each speaker has its own impedance curve. However, even the current power meter only uses a fixed nominal impedance so presumably the OP’s request shouldn’t be any less accurate than at present.
True, and also most power meters read RMS AC voltage. Back (way back) in the day when I worked in engineering at Electro-Voice we used 1kHz for impedance and most distortion spec's. When EV was eventually acquired by Mark IV Industries and Midas/Klark Teknik, DDA and Dynacord became sister companies they started up the Mark IV Pro Audio Group, where I worked for seven years servicing and supporting the KT lineup and Midas/DDA consoles. Those were the days!
-
Ikm pretty dumb when it comes to electronics but the manual states thate the power amp delivers X watts at Y impedance. Presumably this is because current in the Power Formula is dependent on voltage and impedance. Therefore, power would change with impedance.
Impedance is mainly frequency dependent.
-
One way would be to do a sine wave sweep and manually plot the curve