I like your kind of Humor, but it`s dangerous to play with the high hopes of our Kemper-buddys around here
Posts by aehaem
-
-
Nich fragen, drüber freuen...
Komm schon, die FX Abteilung is das nächst große Ding an dem gearbeitet wird. Und ganz ehrlich, bei dem Verstärker-Konzept bin ich gern bereit nochn paar Pedale dazuzustellen. Der Profiler ist so schon echt DER Überflieger, aber natürlich bin auch ich froh über jedes FX das da noch draufgepackt wird... -
You may use an Dual Expession like this:http://www.pigtronix.com/products/dual-expression-pedal/
It has two outputs, and a polarity reversal switch for one of themOr this: http://www.amazon.com/Mission-…ssion-Pedal/dp/B007HQH6VG
It has two outputs and a so you could decide to use it with KPA or H9, by pressing the pedal through... -
It don`t has to, but in my case it`s easier to get the desired rigs with Midi controller, since they can be selected one by one by single press, instead of searching them in RM where I cannot see what Rig is assigned to Midi... Was just a thought to simplify the procedure
-
You can stick your KPA to RM, then uncheck all FAV`s... Then in your KPA, make all Midi-assigned Rigs to Fav`s. Now you can delete all Rigs but Favourites... That`s not the most fast way, but you`ll reach your goal.
-
I use my midi in and out for my fcb 1010. so there is no jack left to run the h9 with midi, whats the trick behind it?
There are 16 Midi channels to use, so you can hook up up to 16 devices, all listening to their own commands...(Devices have to have Midi thru(sometimes you can use out for thru, but you have to adjust then...), apart from that, you`ll have to split/merge Midi line to trigger more devices ( I have my Midi controller merged with Drum Computer to have control of changes per controller, and Drum Computer remotes all timings(Midi out from controller is splitted before, to also control Drum Computer...)))
If your controller allows 2-way-Midi-communication with KPA, you can also remain using i/o for controller and use the Midi thru to remote the h9 (the commands of your controller are passed THRU the KPA).
And last but not least, KPA can send commands even with Midi thru port (but be aware controller commands are NOT passing THRU anymore then...)Hope that was your Question...?
-
Ciekawe akcenty - pozdrawiam
Pozdravljam !
Did you use a ignore button, or why I`m unable to understand?
-
with rig manager, I can see I can move my order of performance around , but I can't drag and drop , let's say from right screen , to my performance folder .
You can copy and paste...Also, I thought I could open a performance within rig manager,
You can open Performance in RM...move the order of rigs within the performance...
...and move the rigs up and down (with mouse right click).Hope that helps
-
You'll want to look at the Morgan AC20 by rmpacheco.
It's on the rig exchange.Rig x-change can`t find the profile, only one "jazzy"Morgan from "the alchemist... And no suggestion for rmpacheco. I still had this profile and thought it`s stored in my RM, but it had disappeared there also ...
Maybe someone out there can send it??? -
How about locking settings, with a profile from RE and a note, which (commercial) profile should be used?
-
Thank you, for doing another awesome job (and also for sharing for free...). I`m curious what will be changed, when they become comercial?
-
Good to know, so I`ll have to try it out...
-
Sehr schön...
-
My Kemper fortunately me...
-
More gain = more Leds = more used power when tweaked... (just kidding)
-
I am also using Kemper with Infinity, but I use a drumcomputer (aka Beatbuddy) as Midi master,
Midi out - Midi splitter - Kemper Midi in
- Infinity Midi in
Works perfectly, but you`ll have to controll the time with Beatbuddy, wether you play with or without, cause it allways sends the time...Maybe it would help you to set measure to 1/4 in Infinitys application?
Or you`ll need something like this: http://www.moltenvoltage.com/p…or_by_Molten_Voltage.html
-
When I dial loop - mix at 100 % I also get volume drop...
-
Has anyone here started using it?
-
Maybe some universal names, that all sellers can use... That would make it easier for us user (so we only would have to search for Marshall and Martial, not so many wordplay) to find Rigs in RM...
-
Sehe ich ähnlich, wenn es so einfach wäre, hätten wirs schon längst. Wäre mal interessant zu hören, woran es hängt, aber wer läßt sich da schon in die Karten schauen...
Glaube aber nicht, daß man uns da leere Versprechen macht und daß die Kemper GmbH gute (!!!) Qualität abliefert, ist hier nun ja wirklich bekannt.