First thing have you calibrated you pedals?
First thing have you calibrated you pedals?
No. I wasn't aware that I needed to. Thought the unit was plug and play. Was this in the instructions with the chip? thx.
Don
I highly recommended you do it this first.
Will probably make your wah work.
Ok, many thanks. I will give this a try after work.
Cheers,
Don
Also you surely know that you must have an active wah slot present in your rig?
Also you surely know that you must have an active wah slot present in your rig?
Haha..yes, I am aware of at least that, lol. Thanks!
Don
Great! 
I just got the FCB1010 and Un04Kemper chip, and I had the same problem as DXTOPHER - i couldn't get the wah to work, nor the tuner. I followed the instructions from the link that TROYNOVA provided above, and now both the wah and tuner work (tuner by pushing the volume pedal all the way heel down). So thanks for this!
The only confusing thing was the calibration instructions - they kept saying "...once adjusted..." but didn't say anything about 'adjusting'. Turns out (and maybe I'm the real idiot here), you don't have to 'adjust' anything - the board/software in the FCB just needs to know that each pedal is all the way up/down before you hit the UP switch, and it knows to consider it bottomed out or topped out.
I must have calibrated mine 10 times before I figured it out! I am a true noob (newbie) at midi controllers, and it shows. But I made a lot of progress tonight!
