I know this is a topic that's VERY subjective since everyone has different setups but I'm gonna go ahead and ask anyway! It might shed some light for others with small setups like myself or fellow PreSonus users etc
I believe my connections to be correct as I've been following the Kemper Reamp Tutorial by Nakedzen on YouTube [https://www.youtube.com/watch?v=6S40buL97cY] however I may have done something wrong [I can't help it guys, I'm new to this kinda stuff!]
The main issue I THINK I'm having is my routing in Pro Tools OR something to do with SPDIF and my FireStudio Mobile, I'll list my settings first to see if I'm doing anything wrong there!
Kemper
Kemper left output to PreSonus XLR input
SPDIF Input Reamp selected [different to YT video due to version differences]
Kemper Output Settings: Master Stereo Main Output | Master Mono Monitor Output | Git Analog Direct Output | Master Stereo SPDIF Output
SPDIF Connections: SPDIF Out -> PreSonus SPDIF In | SPDIF In -> PreSonus SPDIF Out
Constant Latency selected
PreSonus Fire Studio Mobile
Next up is PreSonus' Universal Control program. I usually keep the main outputs muted to prevent latency when in Pro Tools. I can change the clock course allowing the SPDIF to be the clock source [see picture] however I usually leave the FS Mobile as the master [this may be one thing I'm doing wrong...]
[Blocked Image: https://copy.com/M9u9fzwyAvyJ9ZBc]
When I activate the main outs I hear small crackles coming through the SPDIF I\O when it's connected which makes me think that the FS Mobile IS receiving a signal from the Kemper, the SPDIF crackles also occur when muted, you just don't hear the crackles [see picture ]
[Blocked Image: https://copy.com/CvQ71gGoLAa97KZK]
Pro Tools 11
In Pro Tools one thing I am having trouble with is the SPDIF I/O, purely because I have ABSOLUTELY NO IDEA WHAT I AM SUPPOSED TO DO.
The FS Mobile is selected as the playback engine.
In the I/O Setup I have Mic 1-2 followed by Line 3-4, 5-6, 7-8 and SPDIF L/R in the Input [see image]
[Blocked Image: https://copy.com/JlJOK6ebsCLstduV]
In the Output I have Daw 1-2, 3-4 and 5-6 available [see image]
[Blocked Image: https://copy.com/ycTrjqGVQHVOiLpR]
Should there be a SPDIF option there?
Finally there's the routing of my tracks in Pro Tools, these have been left blank as I reset them for the purposes of this thread [see picture]
[Blocked Image: https://copy.com/cOHVz6b7iiwy094I]
If anyone would be able to help me resolve this that would be awesome!
I can't wait to get reamping