Trouble with using FCB1010

    Hi,


    I've posted all the details on TGP. I just got a Kemper and have to have it working via a midi controller to use in a practice on Sunday before a big gig.


    I got a Uno4Kemper chip but it was faulty. So I've gone back to the standard chip and am trying to programme it via midi.


    I can turn stomps on and off and I can use the CC commands 50 through to 54 to change from slots 1 through 5 of the currently selected performance.


    However, it won't respond to programme changes. The FCB can send 1 through to 127 but the Kemper doesn't respond. I know this works as this is how I controlled my Multiamp before I sent it back.


    If I try to stick with the CC command approach then I was hoping to either change banks with the FCB up down pedals (doesn't work) or use the #47, 48, 49. However, if I use 48 with a value of 1 it must keep sending the 1 as the performances scroll to the last number and get stuck. If I set it to send a value of 1 and a value of 0 on the second stomp it just pauses from scrolling up for a second and then drops right back to performance 1.....but it doesn't allow me to move from performance 1 to another performance like 2 or 3.


    Can anyone please advise as this is very disheartening and I have little time to get this sorted.


    Thanks,
    Andy

    Think I've found a work around....but here's a weird thing....it's late
    so I'm playing quieter....when I turn my master volume down low my
    slightly overdriven patches sound much more overdriven.....what's going
    on? I thought the master was supposed to be a pure volume control and
    nothing else?


    How do you know the chip is Faulty? You need to calibrate the FCB 1010 also, or it won't work properly.
    Lots of info/threads in here on how to do that. Also the uno4kemper and Kemper manuals will tell you all you need to know to get it working.
    I had a few issues initially, but after some reading and patience.... its working great.

    Quote from wcfieldskx


    How do you know the chip is Faulty? You need to calibrate the FCB 1010 also, or it won't work properly.
    Lots of info/threads in here on how to do that. Also the uno4kemper and Kemper manuals will tell you all you need to know to get it working.
    I had a few issues initially, but after some reading and patience.... its working great.


    +1. Do some trouble shooting with Xavier from uno4kemper.com regarding the chip. If it's faulty he'll send you a new one.