I have a CLR & a DXR10 & I'm guesting for a band that uses PA in a couple of weeks. How would you recommend I set up? I've been using the CLR as a backline & the DXR10 as a monitor.
Setup for PA
- Jesone
- Closed
- Thread is marked as Resolved.
-
When you're used to making your rigs using the CLR you're good to go to PA without any tweaking on your
side.
Use the main outs to FOH and use the monitor out for your CLR or DXR10. Personally I would take only one of them, preferably the one you want to take to gigs (which in my case is the DXR10 90% of the time).
Unlink the main outs from master volume and send -15 dB to FOH, the mixing Guy will be happy. -
When you're used to making your rigs using the CLR you're good to go to PA without any tweaking on your
side.
Use the main outs to FOH and use the monitor out for your CLR or DXR10. Personally I would take only one of them, preferably the one you want to take to gigs (which in my case is the DXR10 90% of the time).
Unlink the main outs from master volume and send -15 dB to FOH, the mixing Guy will be happy.This ^
-
I'd put the CLR on a pole and set the DSP to Flat
-
I do the same thing Ingolf does.
-
I Use a DXR8 + In-ear, -15db main outputs into JBL PA dont remember the series.. all guitarsounds are good and nice. If its sound nice trough a CLR or DXR, it should sound the same trough a good PA! I have playd on some conserts with PA who is not own by my band, and got thumbs up from the sound engineer!
