Hi
I have tried to search for this feature, but I don't find any answers.
I want to use a button on the remote to turn of the delay and mute the delay trails. I relay don't find I way to do this... Is there any?
How do I turn off the delay trails with the remote?
- little_harry
- Thread is marked as Resolved.
-
AFAIK this is not possible with the Remote at the moment.
-
I remember that a few OS back, the delay trails were automatically cut off as soon as you disengaged the delay. That was my complaint, because I wanted the trails to go on when the delay was turned off. But really, this should be a choice on a rig basis.
-
I agree, and hopefully it will be implemented this way, soon.
-
Yep
-
I could be wrong but i think if you use an expression pedal for volume you can set the volume to be pre/post stomps and i think it will cut off the trails when you lower your volume.
im at work at the moment so i cant test it out right now -
Pre-post FX?
-
Pre-post FX?
just tried it , if you go to page 3 of your rig settings and set the location of your volume to post effects it will cut off the trails when you lower the volume pedal -
Yep, so it is placed "post fx", since tha delay can only stay in the FX (not Stomps) section
-
I could be wrong but i think if you use an expression pedal for volume you can set the volume to be pre/post stomps and i think it will cut off the trails when you lower your volume.
im at work at the moment so i cant test it out right now
This is correct and can function as a workaround although the OP (and me) are looking for something else.
-
This is correct and can function as a workaround although the OP (and me) are looking for something else.Thanks for suggestions!
But, yes, I need something else. This workaround will not cut the trails, they will still be there if you put the volume back on too quickly...
And I don't want to carry a ekstra volume pedal for only this feature...
-
Currently trying desperately to turn off delay and reverb tails using the remote. Have had no luck, no matter what I do (enable tuner, unable separate tuner, turning off delay in rig, changing rig) the delay spill over continues. Hugely frustrating when trying to implement a dead silent stop live. Surely must be a work around or option to disengage this feature.
-
It's a different CC message to have the trails stop. I'm sure that will eventually make it to the Kemper remote where the user can select which one they want. In the meantime only external controllers that can change this number can turn on/off.
-
For me it's the opposite that happens. The volume pedal is set to pre-effects, but the delay trails stop as soon as I back off on the volume pedal.
It seems like the volume parameter in the rig is not doing anything (I tried all - pre, post, etc...).
For info, I have set the volume pedal to control volume on the "monitor out".
I have a Boss FV-500H volume pedal by the way. -
I have set the volume pedal to control volume on the "monitor out"
If your pedal is set to control the Monitor Output in System, this will override the setting in the rig.
-
Thanks Paul. The reason I did that was to avoid the bug that brings the volume down to zero at each reboot of the kemper.
-
Thanks Paul. The reason I did that was to avoid the bug that brings the volume down to zero at each reboot of the kemper.
My KPA does not reset to zero at each reboot (but, I don't use a volume pedal). Is this an expression pedal thing? If you sweep the pedal to calibrate it when you turn it on, this should not be an issue, should it?
, -
As you said, I have to sweep the volume pedal after each reboot. This is an inconvenience.
I'd like to see the volume stay the same as when I switched off the kemper. Or at least have it full, not a 0.
