Hello Folks - First I must mention that I have read the Official Kemper manual already but still I am not 100% clear on my question below. Since I do not own a Kemper YET, I'd like to ask you guys.
I am looking whether I can use the Kemper to efficiently control settings on my Guitar with Antares ATG system. Basically, the ATG system can store up to 64 presets that can be recalled via MIDI PC.
I know the Kemper can transmit MIDI PC in Performance mode. The question I have is whether I can assign the same PC value (to be transmitted) to multiple Slots?. This is to activate the same preset in the ATG system while using different Slots in the Kemper.
By reading the extract below it is not very clear if the value must be unique or can be repeated in multiple Slots. NOTE: Remember I am looking to transmit, not receive, which I understand must be unique.
Quote from Kemper Reference ManualTransmitting MIDI Commands in Performance Mode
MIDI commands can be triggered and transmitted to up to two external devices, whenever a Slot is loaded in Performance Mode. Select “MIDI Settings” on page “Slot Settings” and select the MIDI program change numbers associated with Slots of current Performance. In System Settings, navigate to page “Perform Mode: MIDI”, and use soft knobs 1 and 2 to assign a MIDI channel to each of the external devices. Use soft buttons 1 and 2 to determine whether the corresponding external devices are connected to MIDI OUT or MIDI THRU.
Another question. Can you transmit MIDI PC in Browse mode? I know you can receive them no problem and must be unique so the KPA knows what Rig to activate.
Thank you.
Christian