Does anyone know if I can run my kemper powered amp (mono) together with a separate power amp to get stereo in a stereo cab I’m using? Essentially being able to monitor stereo effects from the stereo cabinet as well as being able to use stereo widener etc. ?
Kemper powered amp with separate power amp
- Mykels3
- Thread is marked as Resolved.
-
-
Hi Mykels3.
The short answer is "yes".
Connect the DIRECT OUTPUT on the Profiler (if you have a Power Head) to the separate power amp.
If you have a Power Rack
Connect the MONITOR OUTPUT to the separate power amp.
- On the Profiler, press the output menu
- On page [1/8]
- Enable "Monitor Stereo" with the soft button above the display
- Set Monitor Source to "Master Stereo" (second rotary selector below the display)
- On page [1/8]
Please see the Kemper Manual (link below)
Do a search for MONITOR OUTPUT (2)
- On the Profiler, press the output menu
-
Thanks. So one line goes to speaker out to “left” speaker and the other line goes from direct out to the power amp/ “right” speaker?
-
Hi Mykels3,
Thanks. So one line goes to speaker out to “left” speaker and the other line goes from direct out toothed power amp/ “right” speaker?
Yes.
You can confirm that in the Output Sources table in the Kemper Manual.
-
Thanks.
-
I was going to trade in my Marshall Code 50 but now I am considering keeping it to run a LOUD stereo setup with the powered Kemper and Kab. Could be interesting!