SPDIF Out: Left - dry signal / Right - amp signal

    I usually record on a stereo track which has the DI-Signal on the left side and the amp signal on the right.
    So I have all options for reamping later on AND I use the DI-waveform for editing.


    The downside: ro realize this I have to use the analog output of my Kemper, which means an extra D/A and A/D conversion which sucks.
    I would really love to avoid that and use the spdif-signal.


    So I bring up again the suggestion of

    tylerhb    :


    I could imagine a config dialog for the SPDIF output routing in the following way:


    1. normal Amp output
    2. dry DI output
    3. mixed mode. Left side: amp output, right side DI output


    Please make it happen!

    Yes, that would be a handy feature - although I'm not missing it as much as I thought when I switched to KPA from Eleven rack. I rarely feel the need to do any reamping with KPA and stay with the sound I used while recording.


    But when using the "direct output" of KPA, there's no AD/DA conversion inside KPA - the signal path is analog. When I feel the need to record the DI-signal I use that.


    Check for example this post by CK:
    www.kemper-amps.com/forum/inde…7877&highlight=#post17877