Hi everyone,
I am trying to reroute the original guitar signal from Kemper into AXE FX III Input/Instrument for additional processing. My guitar is going into Profiler Stage input, and SEND 1 is set to Git Analog. SEND 1 is then connected to AXE FX instrument input. It seems to me like the level of the signal coming out of SEND 1 is way lower than what AXE FX III is expecting. It is not so evident on cleaner amp models, however, when a heavy gain amp model is selected on AXE FX, the signal is not driving the app model to produce the expected distortion. When I swap the guitar cable from Profiler to AXE FX, there are no issues - so the cable is not the problem. Also tested with different cable along the signal chain, and also ruled out that issue. I would have expected Git Analog to send a strong signal as much as it is coming from the guitar. The only viable solution I have got so far is to increase the AXE FX input level up to ~+12db. Monitoring the sound via AXE FX Headphone out. Got confused and trying to figure out what is going on. Your help is appreciated.