Appologies if this is a repeat, but I can't find the tech spec for the remtoe and would like to know what the voltage and M/A delivered down the ethernet cable is
Does anyone know / have a spec sheet?
Profiler remote voltage / ma q
- Stevie-J
- Thread is marked as Resolved.
-
Given the remote can be run from power provided by a POE injector (Power Over Ethernet)...the IEEE standard says 48 to 57 volts (usually 48).
-
The Remote works on a different voltage when fed from the PROFILER. Seperate wires are used for those two voltages. Don't feed 48 volts into the wrong wires since it could damage the Remote.
-
The Remote works on a different voltage when fed from the PROFILER. Seperate wires are used for those two voltages. Don't feed 48 volts into the wrong wires since it could damage the Remote.
Can the power from the Profiler cause damage to an ethernet switch or HUB?
Why deviate from the PoE/PoE+/PoE++ standards designed to make alle ethernet-devices interoperable?
-
G String
Moved the thread from forum Profiler Remote - Questions and answers to forum Profiler - Questions and answers.
