WiFi Midi to KPA via iPAD, TB Midi Stuff and "the missing link"

Hey guys,

I just received "the missing link" a WiFi/OSC/MIDI converter. US manufacturers link and where to buy in Europe Link

[Blocked Image: http://www.wifimidi.com/MissingLinkProductPhoto425.jpg]

The tiny little box can be connected to the KPA USB port for DC, plus Midi Cable and provides a WiFi Hotspot for iPad connection.

[Blocked Image: http://db.tt/L1STmlvm]

1st usage

1. Just take your iPad
2. load TB Midi Stuff and
3. one of the KPA templates.
4. Take a USB (e.g. printer) device cable and connect it to "The Missing Link" and the USB Port on the KPA to provide power (KPA USB does not send/receive midi yet)
4.5 Connect Midi Out MissingLink to Midi in KPA with cable
5. in the TB Midi Stuff Menue "Application Settings" enable "The Missing Link" and allocate Midi In/Out to The Missing Link WiFi Out/Input
6. Connect the iPad WiFi Signal to "MissingLink" Hotspot
7. Restart TB Midi Stuff

and you are done.

It works well and wireless - good fun

No guys. Its just to have power save. The missing link runs stand alone only with midi cable connection. USB is used for power only in this case.

Made some corrections to my text above to make it more clear.