Hi,
does anybody know, if it´s possible to controll the KPA with the POD 2.0?
Hi,
does anybody know, if it´s possible to controll the KPA with the POD 2.0?
Hm, it's a long time ago that I had these but if I remember correctly the floorboard was connected with some kind of RJ45 plug and did not use Midi connections and protocol. So no, I assume this can't work.
Cheers,
Markus
If you connect the floorboard into the POD 2.0, you could - conceivably - due some rig changes, but I doubt that you'd have any control over the stomps.
Thanks for the fast response. I want to connect the Floorboard to the Pod, and from there i go with midi to the KPA. So i can at least control some rig changes.
Thanks for the fast response. I want to connect the Floorboard to the Pod, and from there i go with midi to the KPA. So i can at least control some rig changes.
That should work just fine.
Thank you. I will try it and i will report
Thx so much Janus, i never thought about doing this and it seems to work !!
I think i will use my old pod and floor board for the moment !!
So i need to ask few things:
[Blocked Image: http://www.dolphinmusic.co.uk/shop_image/product/4115-line-6-pod-2.0-multi-fx-amp-simulation-unit-large.jpg]
[Blocked Image: http://cachepe.zzounds.com/media/quality,85/Floor_Board-d396393b8ffde0a0202e58c45fa2d4a4.jpg]
So, on the floor board, the bank up, bank down, channel A, B, C, D and expression volume pedal works.
The channel select/effect on off, the tap tempo/tuner and the wha don't work.
For the expression volume, when it's off the volume is not totally off, it still some guitar sounds but totally clear. when you push the pedal, the rest of the sound and the gain appears.
For the channel selection, with the pod 2.0, you have 9 bank with 4 channels each.
You have 38 channels, from 2 to 37 with bank and channel select, The channel 1 when pressing "manual" on the pod and the 38 when pressing "tuner" on the pod.
On this photo, you can see a little rectangle with the number 2, it's the my default Bank 1, channel A.
[Blocked Image: http://img15.hostingpics.net/pics/286379SAM0030.jpg]
Does anyone know how i can replace those default profile with wich profile i want ??
On the pod, when you push or turn the other button you have the message : "Module is empty ! Please select a type or preset."
I think "output level, drive, bass, middle, save and tap hold" can't be assign.
I assign "treble, chan vol and reverb" with the on/off of effects but i don't know how, if someone can explain how to do and how to erase what i did.
The "effect tweak" is the course of wah, same here, if someone have an idea to put this course works with the floor board wha pedal, it would be cool.
Thx.
So, i know how to assign midi channel (system, choose midi channel and assign)
Do you think it's possible to make any manipulation to make the wah working ?? (kemper, pod ??)
Probably you cant because CC in pod 2.0 are fixed, if i'm not wrong.
You'd rather drop some bucks on a used XT, which should be capable of send different CC instead of the fixed ones.
I guess You also need the newer Shortboards, those with USB ports.
They are programable so, in theory You should be able to set them up to match whatever features that the KPA has...
Ok thanks, i think i will wait with that until the KFC is available and buy it if not expensive.
For those how use foot controller (any) how you judge the time for changing rigs ?
For the moment i find it too slow and audible, changing while playing is not really possible to be accurate, don't you think ?
Hi, I really like to do something with my wah from my floar board.
So, for the moment my wah do nothing to my kemper and the wah/whammy effect is in my "effect tweak" button.
I looked in the pod 2.0 manual http://line6.com/data/6/0a060b…uide%20-%20English%20.pdf and saw this:
Effect Tweak: Transmitted MIDI Range: 0-127 Control # :1 Received MIDI Range: 0-127
Wah Wah Pedal On/Off Transmitted MIDI Range:
FB SWITCH ON=127/
OFF=0
Control # :43 Received MIDI Range: Rcv: 0-63=OFF, 64-127=ON
Wah Pedal
Transmitted MIDI Range
: 0-127
Control #
:4
Received MIDI Range:
0-127
Is it possible to configurate the midi of the kemper ? maybe to replace what it recieve from effect tweak ?
I believe that the CC # of the wah in the KPA is set and cannot be changed.