Don't forget that the high strings on a 12-Strings guitar are NOT 1 oct. up....
Pitch shifter presets / recommendations
- Raoul23
- Closed
-
-
Don't forget that the high strings on a 12-Strings guitar are NOT 1 oct. up....
That's right - bshaw, if you were expecting the exact sound as a twelve string (Octave E, A, D , G strings, and unison B and E), that is not what this does. With this method, all six pairs of strings are tuned in octaves.
-
I've never got into this pitch shifting stuff although I can see the potential, I'm pretty traditional and find it a bit intimidating.
Has anyone put a simple video showing how to do some of this stuff using the kemper, it would really be helpful way in to this? I'm sure I'm not the only one.
Neil -
Neil,
There are a couple dozen profiles (so far) on the Rig Exchange with many of these suggestions - if you load those, you can see how they were done, and you can save the individual stomps as new presets for the pitch effects.
-
Display More
Hey
And if someone have figured out like these style harmonizer settings can someone please post those?
Iron Maiden style harmonizer?
Metallica Master Of Puppets solo section harmonizer?
Dimebag Darrell Floods and live settings what he was use little bit harmonizer?
And If someone have Orginal Digitech Whammy can someone post all those octave settings and tuning settings?And please tell us if you have that pitch shifter in effect loop or front off amp ,because there is huge differend where you put that.
I still didn't install the new firmware so I'm actually guessing, but what pops in my mind is Trevor Rabin's guitar solo in "Owner of a lonely hart" by YES, quite sure it's a fixed, non diatonic (intelligent) pitch shift...
-
The Rabin sound is mentioned in one of these recent pitch threads. It is a pitch up one fifth and another pitch up one octave, I think.
Update: confirmed with post 15, this thread.
Download the below rig from the rig exchange, and change -5 to +7
Chrom -5 +12 ADA-MP1 ADA-MP1 Mark Hall 4.00 / 5.00 April 10, 2013
-
paults - Thanks for the input that worked lovely. I didn't need to match the 12 string exact just looking for a similar ringing result. I have the chromatic, micrpitch and reverb and it sounds like I actually meant for it to. I'm playing the my JP6 music man with the piezo through the V99 Rig.
-
You're welcome! I'm glad it is working for you
Hey, post that rig - that pitch effect is not on the exchange yet.
-
Hello
Hey lets say if i want play marty friedman and jason becker style harmony runs and my guitar is set tuning EADGBe standard. And those harmony runs was MINOR three and Four bellow. So that second harmony part was down minor three and four usually not up ,how i must set my key and voices and so on.... ?
-
Negative number values give you intervals below the source note
-
Negative number values give you intervals below the source note
Hey
Yeah i know that negative down and + is up. But need help those settings voice key and minor how those must adjust?
-
Here are intervals, in terms of half steps. You can also just count the number of frets.
-
Can anyone give me some tips on what settings to use for the harmony lines at the end of Bohemian Rhapsody?
-
Try this, in the X or MOD slot (you want the harmonies to be generated AFTER the amp, so it sounds more like multiple guitars and amps) :
Harmonic Pitch:
+3 , -4 , Key: Bb/Gm , Balance (0) , Mix 50% -
You may not want both pitches, you may want one louder than the other. But, these settings will get you in the range.
-
I also love this feature. No more retuning the guitar or have another one ready.
New patch with a transpose -1 and go.Absolutely love it.
I love the transpose. I can set it at -1 and be tuned down a half step. Or -2 a whole step.
It's great.
-
I can't find a pitch shifter stomp, where is it? (updated to version 1.7.0 already)
-
I can't find a pitch shifter stomp, where is it? (updated to version 1.7.0 already)
It's in the 1.8.0 beta.
-
It's in the 1.8.0 beta.
thanks pal, I better waiting for public of 1.8.0
-
thanks pal, I better waiting for public of 1.8.0
No need to wait. Public betas of the KPA are very stable.
