Behemoth cover using SinMix's Laboga Mr Hector profiles. Hope you guys dig it!
I have the 6i6, and bought it because of the SPDIF I/O.
I can hear there is a noticeable difference between SPDIF and line signal. SPDIF sounds more crisp and has a clearer top end, where as the line signal sounds warmer. Also, with SPDIF I don't need to worry about the signal level into the DAW, I leave it at 0db and it never clips, no matter how hard I pick. I set the SPDIF output to DI and Stack, and record both tracks at 44.1kHz in Logic.
I leave the line and XLR outputs for live use only.
I'm also using the Kemper's SPDIF i/o through a Focusrite 6i6 into Logic.
Just make sure the cable you use is the correct one (75ohm), there should be no problems.
Yup, BIAS is pretty good. You can also switch off the cab to use it with a poweramp and cab.
These days a used iPad isn't that expensive. I have an iPad 2 with the JamUp plug. There is slight latency, you will notice it. I haven't tried those HD interfaces, or USB interfaces with the iPad but I heard that latency on those is minimal.
I use a lot of high gain profiles myself too. And the stuff my band plays, I don't really need the X Y slots other than EQs.
So, I tweak the profile's Treble, Mid, Bass EQs and the presence to taste, then throw in two EQs in the XY slots. I then put EQs in the X and Y for rehearsal and live use, where I cut a lot of the bass frequencies and boost the mids, and the highs to taste. And I just switch either one on and tweak those on the spot.
Just a thought, if you must use the X Y slots for other things, and since you have 2 Kempers, you could set one up and profile it with the other to save some effects slots 
Thanks!
The lead parts I just used the same profile, but I dimmed down the dry amp signal and added a ton of reverb and stereo delay.
Hey guys!
Did another full cover, this time Meshuggah!
All guitars and bass tracked with the Kemper, using Colossus and Aguilar profiles. Tracked and mixed with Logic.
Enjoy!
Thanks guys : D
Impressive! Arghhhhhh you sound like Corpsgrinder. Like it very much. Your own voice not processed?
That's my friend. Just added compression and EQ to bring up the voice, nothing else : )
I profiled my Dual Rectifier with a Keeley Metal Zone a few weeks ago. This is a full cover with that profile. Check it out if you like heavy music!
Glad to see some death metal love in the Kemper forum! 
I tried to replicate the newer cannibal corpse tones, and this is my first try (download link in the description):
Youtube Link
We recorded a whole record using the Kemper for the guitars and bass. I fail to find which profile we used but it was one of the factory profiles which we tweaked (and EQ'd). Here's a playthru of one of the songs:
Youtube Link
Awesome! Glad that you dig them!
The standard metal combo, profiled with a SM57 and a Rode NT2-A!
If you like the sound, the download link is in the description.
Happy profiling!
Profiled my Dual Recto together with the Robert Keeley Metal Zone. If you know Cannibal Corpse, you might enjoy this profile 
Have fun with it and happy profiling!
Gord, awesome video!
And +1 on what you said about the Lundgren! I replaced my EMG81 with a M6, it is much tighter sounding and the perceived volume seems to be louder.
Hey guys,
Just finished making this. Everything recorded with the Kemper using Mesa Boogie Triple Rectifier, Plexi and Ampeg profiles. Hope you guys dig it!
Hey guys,
My 3rd profiling video. Just got the amp a few days ago, couldn't wait to profile it! Download link in the description.
I also did a 5150 Block Letter and a Line6 DT50, you can find those in my Youtube channel.
Cheers and happy profiling!
Dude, that is a sweet Putrified J shirt you got there, Jason will be quite happy when I show this to him I think Also the profile sounds pretty sick man!
P.S: Welcome to the forum!
Thanks! Yes, I know Jason!
Display More
Sounds awesome thank you!
here's a short clip i did using your profile: https://www.dropbox.com/s/qtogsc2kmss7cp…0EVH%205150.mp3
clean is "marshall jvm ch1 ora" by Jason. Bass is "Markbass 250" by Vangelis Yalamas. Drums are Steven slate drums 4 CLA expansion "CLA rock11" preset.
I would love it if you would do more profiles (maybee with a sm57). thanks again!
Nice!! Glad you like it! I tried profiling my setup with a SM57 before but I didn't like it personally. The condenser gives more details and sounds more "real" to me
Made a video a while ago of me profiling my rig.
The amp is an unmodified Block Letter 5150. I ran the condenser mic into my audio interface for phantom power, and routed it back to the Kemper. Amp settings are listed in the video's description.
http://www.youtube.com/watch?v=82Q3XlaYCyI
Download link here:
https://docs.google.com/file/d…DYTV0Y0k/edit?usp=sharing
Hope you guys like it!!
