Before I had the ISO cab and shields, I used groove tubes 928pr tube converters to reduce the wattage of my amps. This would drop a 50watt amp to about 35watts. The smaller tubes (el84's) would change the amp a slight bit, but not enough to be detrimental. I hated yellow jackets, but groove tubes made a good product that were plug n play and kept the amps tonal character while reducing output.
Posts by Charvelguy
-
-
Good grief, I bought a commercial everything pack and maxed out to a 1000 rigs without even importing the entire pack. I had about 350 rigs already in rig manager before I started importing the everything pack. Its gonna take weeks if not months to go thru the samples to weed out which ones I want to keep. Kemper needs to expand the amount of rigs I can import past a grand!
-
I used to live in a trailer/mobile home. Paper thin walls, neighbors within 15ft. I purchased a pair of 3 sided acrylic shields used from a local guitar center. (Forget the brand offhand) These were about 1/4" thick. Each panel being 2ft wide by 4ft tall. I purchased a Jet City iso cab, wrapped the acoustic shield around the backside of it.
Still had space between the shield and the cab, so I had some auralex acoustic foam tiles and stuffed those in between the shield and the cab. This deadened the amount of sound escaping to outside to conversation level. I could run a 50 or 100 watt head full out and monitor the sound thru my reference monitors. The downside to this the ISO cab would compress the sound compared to an open cab.
This probably ran me about 500 for the shields and ISO cab. I already had the acoustic tiles.
I really like the ISO cab designs by Rivera (silent sister) and Jackson ampworks. They probably have less compression with a better design but they also are considerably more costly as well. -
I've had a similar product installed on a Greco LP guitar. I think it was made by Wilkinson. Similar principle but doesn't sit as high on the headstock. It fits more by the truss cover. This looks superior tho, the G string going out is a typical problem on LP style guitars.
-
I got it to work on my Windows laptop. Strange that it didn't work on a mac.
-
I was trying it on my MacBook. I'll try it on a windows laptop and see if it makes any difference. It is possible it was registered. I might have to contact support. Thanks tho!
-
Charvel San Dimas Pro Mod, which has been pleked.
-
I entered it exactly a few different times. No luck. There isn't a space before the number or anything either.
-
Not sure if you can see this clearly enough -
Sticker on bottom has serial number
-
It says "please enter a valid serial number". I entered it as show in system settings/device info.
-
Found the serial number, thanks!
-
My Kemper is a used demo model I purchased from Sweetwater.
How do I get the profiler to tag rigs in my name?
How do I get to the serial number so I can register the Kemper? -
2016 Gibson Les Paul CM. Never posted a photo here before so not sure how this will turn out. -
I'm really partial to zexcoil pickups. Noiseless, coming in many different flavors.
-
Framus, Warwick
-
Welcome!, I'm in the Twin Cities.
-
Cool, thanks for posting!
-
There's a remote for sale in the Kemper classifieds. Its posted with a few other kemper units for sale.
-
Welcome! Great sketches too!