Posts by digbob

RM auch geupdatet ??

i would like to suggest that everybody here takes a look at this Video from HW

"the version right before this has stable USB connectivity that required NO UPDATING"

Why then you use a Beta Version ?? and blame the Company???

Ok thats funny,

did the same procedure again via USB Stick, downgrade and upgrade

and now Bright Cap works

?????

Hey

have the same issue, tried to downgrade and upgrade via USB

Unfortunately it didn't changed anything

Bright Cap simply dont work in the latest Beta

Quote from benifin

Hi all !

This worked for me.

I *had* installed the latest BETA FW Update from within RM - *not* via USB Stick and as a result, the Bright Cap in RM 3.4.45 and on my Stage running the Latest BETA FW was "broken" / "not working"

The fix:-

1 => don't change or remove or uninstall RM 3.4.45 - leave it alone

2 => then put the previous BETA FW OS 10 10.0.0.46731 on a USB Stick - as normal - and *downgrade" from the Latest BETA FW back down to the previous BETA FW via the USB Port on your Unit - I have a Stage

3 => then put the latest BETA FW 10.1.xxxxx on a USB Stick - as normal - and "re-upgrade back up" to the Latest BETA FW via the USB Port on your Unit

Result

- RM 3.4.45 has remained installed - no changes

- Latest BETA FW 10.1.0.47341B is installed - all good

- Bright Cap Control in RM -and- on the Hardware unit are both working perfectly and are both talking to each other perfectly

Hope this helps.

Ben

Display More

Hey

have the same issue, tried to downgrade and upgrade via USB

Unfortunately it didn't changed anything

Bright Cap simply dont work in the latest Beta

Quote from skoczy

I'm on Toaster(Head) Profiler, I have latest BETA FW 10.1.0.47341B installed by RM and for me Bright Cap Control in RM and on the Hardware worked correctly.

did you update through RM or via USB Stick

Quote from cmbrowns

I had entered a bug report on this, explaining that it has no audible effect from either Rig Manager or the Profiler direct editing.

I got a reply from Hans saying he was able to confirm and he would send it to the Kemper developers. The next reply was:

"I forwarded your findings to our developers and received the following response. The Bright Cap parameter works as intended but is best enjoyed with clean rigs. Please load the MB Plexi rig from the Michael Britt Liquid Profile rig pack and set the modeled gain to zero. You will hear the bright cap effect as it changes from zero to 10."

I verified that this does not work either and let them know. Haven't gotten any further response so far.

Display More

Bright dont work on any of the available Liquid Profiles with the new beta, not on Distorted nor in cleans, simply no function

Quote from benifin

You are right I was wrong. With both the new RM and new Beta FW .... Bright Cap on RM and direct on unit no longer does anything

Ben

Yes here's the same behavior, Bright Cap dont work in the New Beta anymore

I mean no PDF Files , you have to look in RM under The Comments Column for the Rig file you choose , in some cases the Settings are written down there

there are def some settings as example from tonejunkies has some in there it think 2018 Packs, im sure..

just go through the Rig Packs from the former last Years, you will find a lot of settings in the Comments in RM

of some Commercial Rigs Packs

its not good for me, totally regret it that I have bought it, every M Britt or Tonejunkie Pack is way better and less expensive

Quote from whippinpost91850

I still have several proco cables, that are 35+ yrs old and still work flawlessly

here too, since 1987 proco lifline cables, still no problem

Longtime Mac User here, i never got a HUB which dont work, in your Case

i would buy one with 3 or 4 USB A Slots, a USB C Slot which let you plug in the PSU for the Macbook

and Network and HDMI Slots.

You get them for appr 30 to 40 Bucks on amazon, no need to buy expensive ones,

Anker is a serious manufacture with good quality

did you get your problem solved ?

Quote from b_ryan

In the “Prst” folder, I do not see them. I will do what you propose. I think I will open a support ticket before though.

yeah because you dont look for Presets you look for Profiles or Snapshots

for easier use you should copy the backups from the Library to your desktop

then its easier to point RM to the Backup it should load

let me know if you were lucky

ok then better try to load the backups to RM and see if this helps, im sure it will,

start with the oldest

one more Question

What exactly do you mean with Presets ?

Presets in Kemper only saves different FX Settings as Delay Reverb etc.

Do you mean this , or you mean different settings of one . Profile?

which are called snapshots ?