Posts by Jevo

Quote from carlosxuma

I downloaded your other metal pack, Jevo, and I've got to say that the dynamics and response on the ENGL Savage was outstanding. In fact all the profiles were a step ahead of many I'd bought. It's interesting just how diverse the quality of profiles is out there.

I'll probably pick this one up to get even more of it.

What mic are you using on these profiles?

Thanks.
I use just a single SM57

Yes, those free profiles I uploaded months ago to the rig exchange were great and highly rated by users. All tubes were JJ and I'm thinking about going again to those tubes.
In this NOT FREE pack I wanted to capture the 4 channels in different mic positions, one inch makes a big difference!
I have in mind to profile more deeply the Blackmore, the E530 preamp and the Triaxis.

Quote from lasvideo

Wow, some people enjoy crude potty humor. Its a bit to juvenile for me.

You should stay away from internet then!

My live band is an irreverent, funny and parody metal band, quite succesful in Spain BTW. There must be some stupid thing in there, it is kinda signature.

Listen to them:
https://www.youtube.com/watch?v=817pllh44Hk

http://www.jevo.bigcartel.com

Cheers.

My fault, there was a cable mess I was connecting a wrong cable!!
Main and Monitor works perfectly, but Spdif doesnt work. Yesterday it was working. So probably is something wrong with the audio device.
Thanks and sorry for bothering you.

Suddlenly today Kemper doesnt send any sound thourgh the Main Output, Monitor or SPDIF.
I can hear sound thourgh headphones but cannot record anything and Input and Output leds flash as usual.
I rebooted, I updated, I did everything but nothing improved.

Any tip or advice before I contact techncial service?

Last 4 years I've been monitoring my recordings and demos with free plugins. One of my favorites is Lepous Legion. It is not based in any amp at all so I thought it would be fun to profile it.
The chain was:

TSE 808 + Legion + SIR2 + Guitarhack Traditional Impulse

It is already uploaded in the Rig Exchange.

If you like it I think I could profile my favorite plugins presets (mainly Lepou and Onqels TSE plugins)

I did these profiles of my Engl Savage.
One for each chanel plus preamp profiles to use with poweramp and cabinet.
They are also in the Rig Exchange

http://www.elrenorenardo.com/j…11/JE-Engl-Savage-120.zip

You're right! My mistake. Edited.

I did some test to see if it was noticeable differences in tone tracking DI in different ways.
[DI Box: Countryman Type 85] [Audio Interface: M-Audio Profire 610]

1. Classic way:
Guitar -> DI Box -> Audio Interface (monitoring with a plugin)
2. D/O Analog:
Guitar -> Kemper -> Direct Out (Git analog) -> Audio Interface
3. D/O Studio:
Guitar -> Kemper -> Direct Out (Git studio) -> Audio Interface
4. SPDIF:
Guitar -> Kemper -> Spif Out (left ch) -> Audio interface

Conclusions:
Not noticeable differences at all. It doesnt worth to even upload the audio tracks.
The classic way has a very tiny coloration. Not differences in noise ratio.
You can see the EQ analyzer.

1. Yellow / 2. Purple /3. White /4. Blue (Forget that green line)

[Blocked Image: http://soulitude-web.com/archivos/DI.jpg]

I also reamped all DI tracks (spidf) to see if something would change, but it was even closer.

[Blocked Image: http://soulitude-web.com/archivos/Reamped.jpg]

Interlude music is taken from Bob Squarepant Sponge. Ending theme.

Quote from bigHF

to be honest - In your video I liked the amp sound the most!

Me too.

I hope you may find this interest.

http://youtu.be/KFtNVbdwqiY

Quote from olentzero

Very good the profiles and of course the chorizo in the Flying _V

Olentzero buru handia?

I really love that PsaBassEvil profile with the Fender Jazzbass

I totally agree!

But I dont know why you use DIboxes. I profiled the preamp section of the amp by pluging the FXloop Send output to the Kempers regular input.

Thanks guys.
I hope this week can do a especial pack of the Savage 120... All channels, different mic positions...
And also a complete pack of the Triaxis!

Hello, I just did a ENGL Metal pack of Engl Savage120, Savage 60, Blackmore, SE and E530 preamp.
You can get the profiles in the Rig Exchange or download it here.

http://www.elrenorenardo.com/jevo/?p=42

Quote from Armand

Hi,

I want to use my orange rockerverb head with 2x12 cab for rehearsels and some gigs..
But how do you hooked them up?? In front of the amp in or??

I also want to play only with the rack and in ear...

thnx

Display More

1. Guitar to Kemper regular Input.

2. I guess the Orange has a Send/Return fxloop.
Connect Monitor Out of the Kemper to Return in the amp. This way you are only using the poweramp of the amp.

3. Turn off the Cab button of the Kemper for better tone. Get preamp profiles, is better than siwtching off a cab hath has been profiled.

Quote from Guitartone

I downloaded your Engl Pre...I'm trying it tomorrow...thanks, and yes, make more.

Have you tried the Kemper PRE pack, they sound great through the poweramp/cab.

My PRE's are not tweaked at all, are raw as they were captured... so you will have to tweak a bit I guess. I play live with my own Savage 120 PRE and it sounds awesome.

Thos DI you talk sound great but i think they are profiles of the Pre+Poweramp (output + DI Box), so when if I play it through my poweramp I am passing the signal twice thoruh poweramps.. I think.

Why do you use DIBoxes?

Taking the signal from FXLOOP SEND directly to your Kemper works great, and you get the sound of the preamp.