Aha! - Thank you HELL-G I hadn't used a streaming tuner before, just the regular type and the spirit bubble in my Stage.
Be great to have the option to turn the middle string of LED's into a big regular tuner too 
Posts by PVO_Dave
-
-
Display More
From the manual:
The three TUNER LEDs on the front of the PROFILER Player are always active, so you can monitor your tuning
while you play. Even when you're not in tuning mode, the LEDs give you general information as to whether your
guitar is in tune or not. If a guitar string is far out of tune, only the outer LEDs will be on. As your string gets closer to
the correct tuning, the middle LED becomes brighter. If your string is in tune, only the middle LED will be lit. So, to
tune your strings, make sure that the white LED in the middle is on, and the surrounding green LEDs are both off.
The streaming tuner shows a flat string by LEDs streaming to the left, a sharp string by LEDs streaming to the right. When the string is in tune, the LEDs do not move.
Thanks HELL-G
In the UK manual it missing that last sentence (thought I'd missed it)
"The three TUNER LEDs on the front of the PROFILER Player are always active, so you can monitor your tuning
while you play. Even when you're not in tuning mode, the LEDs give you general information as to whether your
guitar is in tune or not. If a guitar string is far out of tune, only the outer LEDs will be on. As your string gets closer to
the correct tuning, the middle LED becomes brighter. If your string is in tune, only the middle LED will be lit. So, to
tune your strings, make sure that the white LED in the middle is on, and the surrounding green LEDs are both off.
If you want a more advanced tuner, you can either hold the TAP / TUNER button for a moment or press an assigned
foot switch or put an expression pedal configured as Volume Pedal into heel position to activate Tuner Mode. While
Tuner Mode is engaged, the LED row on the front panel will act as a stream tuner.
In System Settings of Rig Manager you can find the Tuner Mute option. This determines whether the audio is sent to
the outputs or not. To tune your guitar silently, enable “Mute”. The signal will then be muted, but only while you're in
Tuner Mode. This is a neat way to mute the signal temporarily; for example, to avoid unwanted noise when you
change guitars."
-
Apologies in advance if I'm being a bit daft here, but how do you use the stream tuner?
Once you've pressed and held the tuner button down, you get two lots of two lights on the left and right, where should they get to when in tune? I tuned a string using a clip on tuner to see what it would look like, but nothing was centred, so I'm a bit lost!
Kemper, if you're reading this, for people who like to keep it simple like me, it'd be great to have a tuner option that just shows the string is in tune when the led gets to the centre (above 3) when using the full on tuner mode with the strip of lights.
-
Way back in 2009 my then band recorded an E.P, was sadly very much the case of "all the gear, no idea" on my part as I set about recording us all, which resulted in a recording that only really sounded any good as a demo track. The band split up later that year, I sold on my recording gear and forgot about it all for a while.
Over the years, I've revisited the tracks and tinkered (normally corresponding with a new non-guitar purchase) to no avail, but this year I've finally spent some time actually learning how to use Logic X, re-recording the guitar parts (Kemper, of course! - two of the bass lines too), fixing / replacing the drum parts etc.. I've now got 3 of the 4 tracks done (4th should be ready May time, the original bass player is re-doing his part for me).
For no reason other than I thought it'd be cool to get them on Spotify / Apple Music / iTunes etc.. they are now on all the streaming sites
https://open.spotify.com/playlist/3gON3HegYXfzyAr8jxleTe
https://itunes.apple.com/gb/artist/angry-badger/1458916084
Let me know what you think
-
Excellent profiles, thanks
-
My latest and last guitar for a while, the 'Fancy Surfmaster' is Surfburst flake!
UK made body and neck (GSPBASSES), Mojo pickups (overwound bridge) painted by a very talented man in Wales
Love it!!!
[Blocked Image: https://c1.staticflickr.com/5/4403/36921699685_ea87abb7c0_b.jpg]
[Blocked Image: https://c1.staticflickr.com/5/4380/36921699645_6c51d9834e_b.jpg]
[Blocked Image: https://c1.staticflickr.com/5/4395/36921699595_b5eb498b59_b.jpg]
[Blocked Image: https://c1.staticflickr.com/5/4420/36921699555_84c7620cbc_b.jpg]
-
Looks incredible, @PVO_Dave.
It'd be great if you could post a clip of how it sounds one day; I find myself imagining all sorts of woody goodness when looking at it.
EDIT:
I mean on its own, of course; not in a mix.I'll do that at some point @Monkey_Man - Playing it through the Kemper just a minute ago, you can get Les Paul (ish) from the bridge (which is why I went for a mahogany body) loving it
-
My latest custom spec'd partscaster;
Mahogany body with Koa top, Mojo P90 and Humbucker and a solid rosewood neck
[Blocked Image: https://farm5.staticflickr.com…269223_386c3f1512_k_d.jpg]
More pictures here: https://www.flickr.com/photos/…/albums/72157682592857560
-
Removed on mine too, velcro on the bottom to attach to my pedal board.
-
@PVO_Dave, if Teles had looked like that back in the '80s I'd have taken up guitar instead of bass.
Being a WoodMan™ (no, not the casting guy, you naughty Kemperites!), I'd have been all over that thing like a casting agent on a hot find.
Thanks
It has become my favourite guitar to play right now, the neck is the best feeling one I've played
-
My latest
Walnut and maple topped Tele with a solid rosewood neck
- Oil finished with Bareknuckle pickups (Supermassive P90 and RiffRaff humbucker). Got my signature made in abalone and a pocked put in the headstock, plays, feels and sounds amazing [Blocked Image: https://c1.staticflickr.com/1/748/31826279405_2dbf88057b_b.jpg]
[Blocked Image: https://c1.staticflickr.com/1/679/31711855531_8775264699_b.jpg]
[Blocked Image: https://c1.staticflickr.com/1/623/31709981321_8888e1e34d_b.jpg]
[Blocked Image: https://c1.staticflickr.com/1/459/31709984441_b7e0123c96_b.jpg]
-
Latest partscaster done
- The 79'ish SuperstratPAF type humbucker, 66' single coils (both from Oil City). Paint by a very talented man I know in Wales
[Blocked Image: https://farm6.staticflickr.com/5582/30103887201_9b4ba85de4_k_d.jpg]
[Blocked Image: https://farm6.staticflickr.com/5117/30188583305_b8d0c908c0_k_d.jpg]
[Blocked Image: https://farm9.staticflickr.com/8556/30154200376_c431d52e0f_k_d.jpg]
[Blocked Image: https://farm6.staticflickr.com/5124/30188603325_37921864bb_k_d.jpg]
[Blocked Image: https://farm6.staticflickr.com/5659/30074453752_814107ef07_k_d.jpg]
-
The colour coordination both individually and collectively is just mind-blowing, Dave.
I don't think I've ever seen a smarter-looking trio before. Incredible!
Thanks
- Didn't like Gibson's efforts on the V, I started the X before the Lzzy Hale sig was a thing
Hahaha... that's nice!
Where did you buy the inlay on headstock? Looks very good an professional!
Originally from a forum member on mylespaul, but the V one was from Rothko & Frost
And is that you in the neck humbucker of the Les Paul?
haha - that is a very odd square version of me, yes
#stalkystalky They look great together!
Thanks
-
Chloe? Never heard about them? From where? Looks nice!
My daughters name
- both custom spec'd kits from Prescision -
My custom Flying V
[Blocked Image: https://farm8.staticflickr.com…994161_48a9b24530_k_d.jpg]More photos here: https://www.flickr.com/photos/…/albums/72157668025202554
On the wall of Alpine White
[Blocked Image: https://farm9.staticflickr.com…821051_617103405d_k_d.jpg] -
Spotted on TheFretboard forum: http://www.thefretboard.co.uk/discussion/78622/kazoops-
[Blocked Image: http://i19.photobucket.com/albums/b197/monquixote/Screen%20Shot%202016-06-25%20at%2019.33.06_zpsb4xerrg2.png]
show called Kazoops
-
I had this with my Scarlett too, turned out the cable I bought wasn't good enough! New better 'spec' cable, no more popping
With mine, I kept finding that in Mix control, it kept changing the sync from being s/pdif to internal if you've got the same, get a better s/pdif cable.
-
I think these will be £109 plus shipping, I got a tiny bit of discount for doing the leg work with the measurements
I confirmed it was a good fit today, it should be on the website next week. You can then even choose what colour you want, they do have a green, but it's not dark enough next to the Kemper, I went for black to match my pedal board.
I'll post a link on here when they are live, but you can contact them in the mean time (http://www.swanflight.com) if you want one.
-
In excellent shape, now have a flight case, so no longer needed.
£50 + P&P (or free collection from Nr. Hitchin or Watford)
Dave.
-
Evening all, after getting a really good, solid flight case pedal board, I asked the guys that made it to made one for my Kemper profiler
I supplied the measurements from the Kemper site and some of my own, the reason I went for this and not the Thon was to get the metal panels, rather than wood.
It got delivered today, very happy
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Kemper%20flight%20case/image.jpg4.jpg]
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Kemper%20flight%20case/image.jpg2.jpg]
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Kemper%20flight%20case/image.jpg6.jpg]
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Kemper%20flight%20case/image.jpg1.jpg]
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Kemper%20flight%20case/image.jpg3.jpg]
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Kemper%20flight%20case/image.jpg5.jpg]
It is a nice tight fit, I got them to add a bit of foam in the front to stop it rocking about inside, but there's no danger of that, as its tight on top.
I've got to email them back tomorrow to let him know it's all good, they can then add it to their website
Dave.
